Mark this thread as Unsold
FS: 2 sets of Kinesis K28 18" 993 NB fitment, low mileage 993 calipers and new rotors
#1
Rennlist Member
Thread Starter
Join Date: Nov 2016
Location: Cotttonwood Heights Utah
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
FS: 2 sets of Kinesis K28 18" 993 NB fitment. 18X8.5F 18X10R
Category: Wheels & Tires
Price (no $ sign please): $1
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 993, Race Car
Location (Region): West
Item Condition: Used
Location: Cottonwood Heights Utah
Contact: 801-390-0376
Email: jeffw7@aol.com
Condition: Used
If you need seller feedback before purchasing, please PM me and I will provide you with information or you can simply call me.
Doing a garage cleanout from extra parts I have from my 97 993. With that said the wheels are for a 993 NB fitment.
Edit: Calipers have been sold to Dave.
Edit: Rotors have been sold to Jay.
Next are the 1st set of Kinesis K28's. They are 18X8.5F and 18X10R. Tires will be dismounted before shipping because they are old. Wheels are in about a 6.8/10 condition with some markings on the rims from being manhandled throughout the years. But they would make for a great set of track wheels for someone.
Asking Sold to Wheel Dynamics.
**edit**
I did two measurements per wheel. One from the floor the the edge of the inner barrel. And one measurement from the mounting pad to the edge of the inner barrel.
On the front wheel it measured 9 1/4" from the ground to the edge, and 6 5/8" from the pad to the edge. When converted to MM the fronts were 234.95MM and from the pad it was 168.275MM. Taken the first measurement divided by 2 and subtracted from the second measurement I got around 50.8 offset.
One the rears it was 11 1/4" from the ground and 8 1/4" from the pad which netted a 298.75MM conversion from the ground and a 209.55MM conversion from the pad. Divided and subtracted, I got 60.175 for the offset.
2nd set of Kinesis wheels are in better shape. One wheel has slight markings on one rim where one of the pictures shows where I pointed it out. The tires will also be dismounted before shipping as they are worn slicks. Asking $1900 shipped to the lower 48 for this set:
**edit**
I did two measurements per wheel. One from the floor the the edge of the inner barrel. And one measurement from the mounting pad to the edge of the inner barrel.
On the front wheel it measured 10 1/4" from the ground to the edge, and 7 1/4" from the pad to the edge. When converted to MM the fronts were 260.35MM and from the pad it was 184.15MM. Taken the first measurement divided by 2 and subtracted from the second measurement I got around 53.
One the rears it was 11 1/2" from the ground and 8 1/4" from the pad which netted a 292.1MM conversion from the ground and a 209.55MM conversion from the pad. Divided and subtracted, I got 63.5 for the offset.
And on the car for reference:
Parts will be shipped within 48 hours of payment. I'm usually pretty good about getting parts out the same day as payment as there is a Fedex near my residence that is open until 11 PM.
Last edited by suprawillis; 05-11-2017 at 07:37 PM.
#4
Rennlist Member
Thread Starter
Join Date: Nov 2016
Location: Cotttonwood Heights Utah
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
You got it.
For everyone else, I did a quick measurement of the offset in the garage which I posted the information just above the pictures. There is a possibility that I could be a MM off but I tried to be as accurate as I could.
The second set of wheels will get the tires removed tomorrow on my lunch break where I will also have the tire company spin the heels to make sure they're straight.
More than likely I will take the first set of wheels in and get those minor bends repaired, or I can offer a discount.
Thanks.
For everyone else, I did a quick measurement of the offset in the garage which I posted the information just above the pictures. There is a possibility that I could be a MM off but I tried to be as accurate as I could.
The second set of wheels will get the tires removed tomorrow on my lunch break where I will also have the tire company spin the heels to make sure they're straight.
More than likely I will take the first set of wheels in and get those minor bends repaired, or I can offer a discount.
Thanks.
#6
Rennlist Member
Thread Starter
Join Date: Nov 2016
Location: Cotttonwood Heights Utah
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Price lowered on each set of the wheels. Unfortunately, I haven't had a chance yet to get the tires dismounted because of 80 hour work weeks, life, etc. However, for serious inquiries, I will make the time to get these taken care of.
All other parts that have been sold are shipped.
Thanks!
All other parts that have been sold are shipped.
Thanks!
Trending Topics
#10
Rennlist Member
Thread Starter
Join Date: Nov 2016
Location: Cotttonwood Heights Utah
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
#11
Rennlist Member
Thread Starter
Join Date: Nov 2016
Location: Cotttonwood Heights Utah
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
#12
Rennlist Member
Thread Starter
Join Date: Nov 2016
Location: Cotttonwood Heights Utah
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
1st set of wheels sold to Wheel Dynamics.
2nd set still available. I didn't have time to weigh them as I had to rush the first set off to shipping, but the Kinesis wheels definitely feel lighter than the BBS E88's I have in the same sizing.
Regards,
Jeff
2nd set still available. I didn't have time to weigh them as I had to rush the first set off to shipping, but the Kinesis wheels definitely feel lighter than the BBS E88's I have in the same sizing.
Regards,
Jeff