Mark this thread as Unsold
WTB: 997 turbo trunk/lid
#1
Intermediate
Thread Starter
WTB: 997 turbo trunk/lid
Category: Exterior - Body Parts
Price (no $ sign please): $0
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 997
Location (Region): West
Item Condition: Used
Let me know what you have and what price you'd feel good to part with it.
Thanks,
Jason
Last edited by JDev; 06-10-2018 at 08:06 PM.
#4
Intermediate
Thread Starter
Would somebody be willing to pass my phone number on to the seller posted above on FB? I'm waiting for approval to join the group, but hoping not to lose the opportunity while waiting.
Thanks!
442.204.6574
Thanks!
442.204.6574
#6
RL Community Team
Rennlist Member
Rennlist Member
If you want to install it with working active aero hydraulics, I'm going to be changing my wife's c2s with TT decklid over to an Eram setup. The left ram forms a drip on the cap about every 3 months, but works perfectly and I've never had a Spoiler Failure message - probably just needs a sealing washer on the bottom banjo fitting. I've had the Erams in the closet for about 18 months but doing the swap has been pretty far down the priority list since everything is working as it should. If you're interested in them, I can move it up the list. $750 shipped via PP F&F for the pump and both rams. (Regular PP OK too, just add 4%).
#7
Former Vendor
I actually know the seller. I passed your number along to him for you...
Trending Topics
#8
Intermediate
Thread Starter
#9
That is not factory...at least not for a 997. It should not have a “hump” for the tail light and louvers look all wrong. It should have a factory part number stamped on it and Porsche symbol. I suggest you let people know that it’s aftermarket.
Done
Done