jpoint

Category: Drivetrain
Price (no $ sign please): $20
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 924/931/944/951/968
Location (Region): Midwestern
Item Condition: Used

Sold my track prepared, but street legal turbo S. Buyer purchased none of the spares. I'll have to take a full inventory, but I know I have the following from the car which had 63K total miles when sold. Most of these parts were removed at about 35k miles or are track spares.

Black leather front seats and rails
Factory airbag Steering wheel
Original Turbo S 16" forged wheels
Original turbo S M030 Koni adjustable shocks and springs
Koni shock adjuster ****
1 or two sets of front rotors - near new
4 17" Hoosiers - never mounted (225 & 275)
2 rear half shafts 1 new, 1 slightly used (non-S turbo)
Original Turbo S Chip set
Original Cat - gone
4 18" Victor Equipment Turismo Wheels w/porsche TPS monitors (actually for late Boxster/Cayman, but fit the 944 Turbo quite nicely)


I'll check the basement for other stuff - may have the M030 sway bars.

Still have to figure pricing - but will consider offers.

jpoint

Update.

The Victor Equipment wheels are also correct size for a 993.

jpoint

Pictured is the driver's seat which shows the worst of the bolster wear. The bolster is not worn through nor are either seats ripped at any seams

jpoint

More pics of stuff. Also have the turbo s brake scoops. the Hoosiers are R3S05's - never mounted still have labels.

jpoint

Correction - the seats are power but not sport seats.

DerekCanuck

I would be interested in the hoosiers. Can you provide a price?

DerekCanuck

Also would be interested in the Victor equipment wheels. Could you provide some pics of the wheels and what you are looking to get out of them?

951pcarguy

I'm interested in all 4 Konis and the Hoosiers if you still have them.

Jay

anb957

I have an 86 turbo. I need a R rear CV shaft. Send me a shipped price to 80012 for the one you listed (the non S turbo one)--I think left and right are the same correct?

Are the S CV shafts different?

jpoint

All I have left is a CV joint and boot, the torsion bars, and the slotted front rotors. I have the Victor wheels and tires - but I'm holding on to them until I find a spare set of GT3 fitment wheels. Sorry - I thought I had updated the post.
Just FYI - the S axle assembly (w/CV joints) will fit a non S BUT the S axle will NOT fit a non S CV joints. The splines are different. If you're rebuilding a non S axle and you just need the CV joints - I could help with that.

944turbocup

Hey, I have a 1989 Turbo 944, essentially same car as yours. I am interested in the passenger seat, as mine is ripped. I assume passenger seat is in good shape but if thats not the case, please describe the condition or attach a pic. What is your asking price for the passenger seat only, including shipping to Stamford, CT? Same question for both seats?

Thanks !

jpoint

As noted THESE are the only parts I have left

Turb-OH Brad

The M030 sway bars are gone?

I am potentially interested in the torsion bars. PM me a price with shipping to 44256.

(If you still have the sway bars, I am also interested in them).

jpoint

$40 shipped

mr965

How much for the 4 Victor wheels and what are the sizes?