Mark this thread as Unsold
FS:997.1 or 996.2 GT3 turbo front 6 pot brake caliper
#1
Rennlist Member
Thread Starter
FS:997.1 or 996.2 GT3 turbo front 6 pot brake caliper
Category: Brakes
Price (no $ sign please): $1250
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 996, 997
Location (Region): Midwestern
Item Condition: Used
Re-pained VHT brake caliper color with urethane clear coat.
Never used after paint.
Ceramic pack are clean and intact. Come with pad retaining clips and 4 new 85 mm caliper bolts.
Shipping included within lower 48, buyer pay PayPal fee if not friend family.
#3
Rennlist Member
Thread Starter
Yes, it will fit any C2S.
See the link for more info.
https://www.6speedonline.com/forums/997/374203-gt3-brake-conversions-facts-997-1-s-non-s.html
You only need to buy turbo 350mm discs + brake pads.
See the link for more info.
https://www.6speedonline.com/forums/997/374203-gt3-brake-conversions-facts-997-1-s-non-s.html
You only need to buy turbo 350mm discs + brake pads.
#4
Rennlist Member
Thread Starter
Yes, can fit any 997 C2S with 350 mm turbo rotors.
approx. $300- for left and right turbo discs.
https://www.ebay.com/itm/Porsche-997...oAAOSwAO9ZUIjD
approx. $300- for left and right turbo discs.
https://www.ebay.com/itm/Porsche-997...oAAOSwAO9ZUIjD
#6
Rennlist Member
Thread Starter
Trending Topics
#8
Rennlist Member
I think what "Bleu by you" asked is whether they would fit a 2009 C2. Several people have responded that they would fit a C2S, which is not helpful to the poster. I am not 100% sure, but I don't think they would fit a C2 just by swapping the rotors and calipers. I think for a C2, you will need so swap out the knuckles (since these have 142mm bolt span and a C2 has 130mm). So, no it is not a direct fit and would require more than just the calipers and rotors on a 997 C2. And you'd need an alignment after swapping out the hubs and steering knuckle. In addition to the knuckle carriers, there is some debate as to whether the master cylinder can handle the 6 pot calipers. They are different part numbers from Porsche. Some have said that their MC was enough and others have upgraded thinking that it isn't worth the risk.
Specs on mounting spacing measurements of calipers both front and rear:
Front:
225mm - 997.2+ (including 991 GT3)
142mm - 997.1 Turbo and "S" models
130mm - Standard (or base) 997 (05-11) and 996 (99-04) ; Boxster etc.
Hope that helps and GLWS!
Specs on mounting spacing measurements of calipers both front and rear:
Front:
225mm - 997.2+ (including 991 GT3)
142mm - 997.1 Turbo and "S" models
130mm - Standard (or base) 997 (05-11) and 996 (99-04) ; Boxster etc.
Hope that helps and GLWS!