Petza914

Category: Accessories
Price (no $ sign please): $1
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): Cayenne
Location (Region): SouthEast
Item Condition: Used

Having recently completed my Misha Widebody 957 Cayenne Turbo S build (https://rennlist.com/forums/cayenne-...s-project.html), figured I'd start a For Sale thread where I could consolidate a listing of the removed, leftover, or purchased but not installed parts I have. I will be adding to it periodically as I do the finishing touches on the car (like the PCCB brake upgrade) and take photos of the other parts, but this is the bulk of it. All parts are Genuine OEM Porsche from an 09 Turbo S removed at 30,000 miles.

Each item in the list is numbered and a price provided. Where possible, I've tried to lookup the Porsche part # from PET and include that. I'll caption each photo with the part # referenced in the list and the photos for each item will be in their own post in this thread. Anything I haven't photographed yet will be in the list, but no photo with the part # provided yet. If you're specifically interested in that part, let me know, along with an email address and I will send you some photos. I will keep the list updated, marking those items sold in red and any newly listed items in blue (until the next list update).

All prices include UPS Ground or USPS Priority Mail insured shipping unless specifically noted otherwise, and assumes a PayPal Friends & Family payment - regular PayPal is of course fine as well, just add 4% when sending the payment. If you live in the Southeast, pickup of the larger items is certainly preferred and totally acceptable - might even get a ride in the donor vehicle

I have some other odds and ends that may not be shown here so if you're looking for something specific, let me know. Big stuff already gone are the front & Rear Bumpers, complete fender flare kit, exhaust tips, rocker panels, & wheels. I also had someone buy a lot of Passenger side parts from me too so if you only see the Driver's side listed (like a headlight), it's because the passenger side has already been sold.

Thanks.

1. Driver's Side all-aluminum intercooler - 7L5.145.803.0 or 955.110.639.10 - $450
2. Driver's Side CLEAR Side Marker / Turn Signal Light - 7L5.949.101.D or 955.631.055.10 - $35
3. Driver's Side Clear Front Turn Signal Light - 7L5.941.181.A or 955.631.185.02 - $125
4. Driver's Side Bi-Xenon Adjusting Headlight Housing (does not include ballast or headlight bulb) - 7L5.941.031.L or 955.631.194.02 - $750
5. Driver's Side Aluminum Look Front Bumper Grill Insert - 7L5.807.681 or 955.505.681.12 - $150
6. Driver's Side Fog Light & Support (part # is for Valeo fog light only) - 7L5.941.699.D or 955.631.165.01 - $75
7. Front Aero Wing / Spoiler (below the valence that holds the fog lights) - 7L5.807.110 or 955.505.513.11 - $200 plus shipping
8. Turbo S Hood with Power Bulge Creases (damage on lead corner where it fell off rack at body shop, but easily repaired during repaint) - 955.511.011.02 - $450 plus shipping
9. Driver's Side Headlight Washer Nozzle - 7L5.955.978.A or 955.628.180.10 - $35
10. Left & Right Fender End Plates - 955.301.362.01 & 955.301.361.01 - $45 each or $75 for the pair
11. Left & Right Intercooler Air Guides / Shrouds - 955.575.572.50 & 955.575.571.50 - $110 each or $200 for the pair
12. Complete Turbo S Big Brake setup including 4 calipers, 4 rotors (380mm F & 330mm R), all pads (rears are new), hardware, wear sensors, dampeners, etc - $3,500 plus shipping (taking $500 deposit to reserve them - will be available to ship in 6 weeks / end of October)

Removed from this vehicle






That now looks like this

Petza914

Intercooler was cleaned in my ultrasonic, heated parts washer with aluminum safe cleaner - perfect condition, super-clean, and ready to install. Intercooler shrouds / air guides also available separately.

Petza914

Perfect Condition and a great upgrade to replace the ugly, amber lensed versions. This is the light that installs in the front of the drivers side wheelwell moulding.

Petza914

Perfect Condition. This is the light that installs in the front left grill opening.

Petza914

Front lens is perfectly clear - no internal haze. The headlight assembly is complete, with the exception of the Xenon headlight bulb and the ballast for it. Cornering Lamps and dynamic height work perfectly without any codes.

Petza914

Condition is Very Good. All mounting tabs and holes are intact. Only flaw is a scuff on the lower left corner as seen in the close-up photo.

Petza914

OEM Vareo brand. Excellent Condition. Includes mounting bracket with all holes & tabs intact, along with working bulb.

Petza914

This is the Turbo S & GTS lower front valence panel. Has some light scratches on the left & right undersides and one mounting hole is cracked but still functional (see photos), but it otherwise very nice. Scratches are easily addressed when color-matched to your car. The part we're talking about is the highlighted yellow one in the parts diagram below.

Petza914

Hood is in excellent condition except for a dent in the lead edge of the front where it fell off the rack at the body shop during the months it was there and landed on the that edge. Should be easily repairable when being color matched to your car. Hinges and latch mechanism not included, as those were reused on the Misha hood when installed on my car. The gas strut support is included.

This part due to it's size will require an additional shipping cost. I do have a box from a Mopar hood that it will ship in after being bubble wrapped to protect it. If you'd prefer to coordinate shipping, I'm fine with that and will provide the weights and dimensions once packed.

Photos to follow once I remove it from the box and clean it up.

Petza914

Perfect working condition - no leaks.

Petza914

Perfect Condition. Straight and no rust. Part is highlighted in yellow in diagram below. Photos are of one plate, but I have both.

Petza914

Part is shown highlighted in yellow in diagram below. These are on the Turbo cars only and route air through the front bumper to the Intercoolers. My new bumper has these molded in so did not need to reuse the originals. Excellent condition.

Petza914

Upgrading my Big Red Turbo S brakes to 958 PCCBs and will sell the complete Turbo S setup with calipers, rotors, pads, hardware, etc. The Turbo S uses the largest steel rotor offered on a 957 Generation Cayenne at 380mm and it's exclusive to this model. This one will require an additional shipping charge due to weight and might need to be split into 2 or 3 shipments. With it being a rare item, I won't have my PCCB kit installed for another 4-6 weeks so am taking a $500 deposit on this with the shipment to occur in late October. All parts will be cleaned up prior to packing.

Mr. Merk

Really wish you had the fender extensions and both clear side markers.

Petza914

Update - Hood is SOLD. All other parts still available.

1. Driver's Side all-aluminum intercooler - 7L5.145.803.0 or 955.110.639.10 - $450
2. SOLD - Driver's Side CLEAR Side Marker / Turn Signal Light - 7L5.949.101.D or 955.631.055.10 - $35
3. Driver's Side Clear Front Turn Signal Light - 7L5.941.181.A or 955.631.185.02 - $125
4. Driver's Side Bi-Xenon Adjusting Headlight Housing (does not include ballast or headlight bulb) - 7L5.941.031.L or 955.631.194.02 - $750
5. Driver's Side Aluminum Look Front Bumper Grill Insert - 7L5.807.681 or 955.505.681.12 - $150
6. Driver's Side Fog Light & Support (part # is for Valeo fog light only) - 7L5.941.699.D or 955.631.165.01 - $75
7. Front Aero Wing / Spoiler (below the valence that holds the fog lights) - 7L5.807.110 or 955.505.513.11 - $200 plus shipping
8. SOLD - Turbo S Hood with Power Bulge Creases (damage on lead corner where it fell off rack at body shop, but easily repaired during repaint) - 955.511.011.02 - $450 plus shipping
9. Driver's Side Headlight Washer Nozzle - 7L5.955.978.A or 955.628.180.10 - $35
10. Left & Right Fender End Plates - 955.301.362.01 & 955.301.361.01 - $45 each or $75 for the pair
11. Left & Right Intercooler Air Guides / Shrouds - 955.575.572.50 & 955.575.571.50 - $110 each or $200 for the pair
12. Complete Turbo S Big Brake setup including 4 calipers, 4 rotors (380mm F & 330mm R), all pads (rears are new), hardware, wear sensors, dampeners, etc - $3,500 plus shipping (taking $500 deposit to reserve them - now available to ship)