When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi guys,
I have an extra vacuum connection port on my 84 US automatic throttle body. It is on the front passenger side and is a pipe nipple that sticks up about 3/4" vertically about 1/2" diameter. I put a cap over it for now, but don't remember what was there. Also, can't get a good picture without removing spider again.
Any L-jet throttle body pictures or diagrams appreciated.
Sorry, and thanks,
Dave
Thanks. That's close but not quite it. I can just see a thick black hose at the top right of the second picture. Any idea where it goes. Also not sure of model changes from yours to 84.
Thanks for posting,
Dave
Thanks again Mike.
In your diagram, if you fine the label "P", and go to the right, you'll see a circle on the throttle body. This indicates a vertical nipple (similar to the rear one for the AAV). There is no connection indicated for that nipple and that's the one I was asking about.
I appreciate your help.
Dave
Isn`t that port where the vent hose from the oil fill/seperator canister drops back into the engine?? Its a different diameter at each end. Larger at the canister side.