In need of power steering pump hardware
#1
In need of power steering pump hardware
Hey, anyone got any of this laying around? If not, do you know where I can buy it? Power steering pump mounting hardware.
It's the two bearings the mount to the block rides on. The rear bolt that holds on the rear bearing, and the front nut that holds in the front bearing. All 13mm.
Also need the bolt that the adjusting arm connects to on the pump. It's the shorter one in the pic. Any leads or info much appreciated!!!!!
Thanks!
It's the two bearings the mount to the block rides on. The rear bolt that holds on the rear bearing, and the front nut that holds in the front bearing. All 13mm.
Also need the bolt that the adjusting arm connects to on the pump. It's the shorter one in the pic. Any leads or info much appreciated!!!!!
Thanks!
#3
Why not just buy them new from the dealer? Buying those small parts used they are likely to be somewhat worn and you shouldn't be using old locknuts anyway. If you post back and tell me those bushings are $50 a piece I will have my answer
#5
#6
At almost 50 shipped, I'll take yours Michael. I'll pm you my addy again, send me your pay pal again and I'll send you the shipping cost. No hurry at all.