When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Category: Wheels & Tires Price (no $ sign please): $3000 Private or Vendor Listing: Private Listing Part fits (select ONLY those which apply): 911, 964, 993 Location (Region): Midwestern Item Condition: Used
Perfect set of Fikse FM10 wheels for sale. No blemishes. Takeoffs from 993 widebody.
$3k plus shipping ($100-150 within the continental US)
__________________ Access our GT Vault - click below to receive our regular blog on all things manual Porsche GT product, including exclusive listings.
Vetted cars, qualified buyers. Creating the best private marketplace for Porsche GT cars in North America.
Last edited by switchcars; 04-04-2017 at 03:01 PM.
Great wheels but you do need to clarify this. 993 widebody wheels won't fit on a 964 widebody. However if they are stock 964 turbo offsets 8 x 18 ET 52 and 10 x 18 ET 61 these will fit the 993 narrow body and the 964 widebody along with 964 narrow body with 5mm spacers in the rear.
Fikses are suitable for both street and track. I'm not aware of any bending issues, but they do occasionally suffer a cracked wheel barrel. It's an easy fix, and Fikse sells the replacement barrels for about $300 or so. I've replaced two barrels. These are beautiful, light weight wheels. A pain in the *** to clean, but worth it.
Fikses are suitable for both street and track. I'm not aware of any bending issues, but they do occasionally suffer a cracked wheel barrel. It's an easy fix, and Fikse sells the replacement barrels for about $300 or so. I've replaced two barrels. These are beautiful, light weight wheels. A pain in the *** to clean, but worth it.
I used the ones on my C2 for years as track wheels. Never had any issues. I have another set of these for my new track car in 9 & 11 widths. The condition and price is worth buying second hand vs new.
Fronts will fit perfectly rears won't unless you run stock height and stiff suspension. I tried stock 993 turbo offsets on my turbo which are ET 40 and they rubbed even with my rolled lips. The rub points were both the lip and the inside of the upper wheel well. These will push the wheel out an additional 2 mm. You might contact fikse and see what it would cost to replace inner and outer barrels. It still might be more economical than buying new.
The weight of these is very noticeable especially over the speedlines of the 3.6T which are anchors in comparison but look great.