Side mesh grills for GT4
#31
Here is another company making stainless side intake grills: https://www.zunsport.com/us/porsche-us?product_id=4720&filter=210%2C158
Just under $100 it looks like. Haven't seen one in person.
Just under $100 it looks like. Haven't seen one in person.
#32
Here is another company making stainless side intake grills: https://www.zunsport.com/us/porsche-...lter=210%2C158
Just under $100 it looks like. Haven't seen one in person.
Just under $100 it looks like. Haven't seen one in person.
#33
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#34
#35
Rennlist Member
I went over to the manufacturer's site and couldn't find a set for the GT4.
To get a feel for how the grills looked on the car I attached one with two metal tab tie wraps to the horizontal bar in the intake and rotated the tabs to the rear behind the bar. I was surprised at how well it stayed in place. Wouldn't want to use the tie wraps for a permanent solution.
To get a feel for how the grills looked on the car I attached one with two metal tab tie wraps to the horizontal bar in the intake and rotated the tabs to the rear behind the bar. I was surprised at how well it stayed in place. Wouldn't want to use the tie wraps for a permanent solution.
#37
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
it doesn't restrict air flow enough to cause issues.
and truthfully, most just dont drive fast enough to really worry about it, me included.
and truthfully, most just dont drive fast enough to really worry about it, me included.
#38
I went over to the manufacturer's site and couldn't find a set for the GT4.
To get a feel for how the grills looked on the car I attached one with two metal tab tie wraps to the horizontal bar in the intake and rotated the tabs to the rear behind the bar. I was surprised at how well it stayed in place. Wouldn't want to use the tie wraps for a permanent solution.
To get a feel for how the grills looked on the car I attached one with two metal tab tie wraps to the horizontal bar in the intake and rotated the tabs to the rear behind the bar. I was surprised at how well it stayed in place. Wouldn't want to use the tie wraps for a permanent solution.
#39
Rennlist Member
That looks to be correct.
#40
Rennlist Member
Thread Starter
Grills still available for some lucky GT 4 owner that doesn't want trash collecting unseen in their intakes. With all the GT4's being tracked this should be a "no brainer" mod.
Last edited by f4 plt; 01-18-2017 at 03:22 AM.
#44
#45
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
^ that car never gone off track !