Mark this thread as Unsold
Lightly used wall mounted wheel hangers
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Category: Wheels & Tires
Price (no $ sign please): $35
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 356, 911, 912, 914, 924/931/944/951/968, 928, 964, 986, 987, 993, 996, 997, Cayenne, Cayman, Carrera GT, Panamera, Race Car, Other Marques
Location (Region): SouthEast
Item Condition: Used
![](https://cimg3.ibsrv.net/gimg/rennlist.com-vbulletin/1500x2000/wheel_hangers_df0897a06ee6d85631b0d22609e98c156595927a.jpg)
Lightly used wall mounted steel wheel hangers, quantity two.
The protrusion tube length is 22".
There are two holes that fit 1/4" lag screws, arranged vertically above and below the protrusion tube. The base plates are 8 1/4" high by 4" wide.
I put a piece of 1/2" plywood behind where I wanted to locate the hangers and picked up the wall studs with the plywood.
Buyer pays shipping to continental US addresses only.
Last edited by r553; 11-12-2016 at 06:02 PM.
#3
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
nine9six,
The protrusion tube length is 22".
There are two holes that fit 1/4" lag screws, arranged vertically above and below the protrusion tube. The base plates are 8 1/4" high by 4" wide.
I put a piece of 1/2" plywood behind where I wanted to locate the hangers and picked up the wall studs with the plywood.
Rob
The protrusion tube length is 22".
There are two holes that fit 1/4" lag screws, arranged vertically above and below the protrusion tube. The base plates are 8 1/4" high by 4" wide.
I put a piece of 1/2" plywood behind where I wanted to locate the hangers and picked up the wall studs with the plywood.
Rob