Foxsasha

I'm looking at a second set of wheels to fit track tyres to. I'm not interested in the look, I'm just after optimum handling fitment with no rubbing or issues. Looking to fit Cup 2s so tyres will be OE size. 5 stud, not centre lock. Should I stay stock wheel spec? If so what are they (width, offset, centre bore) I'm struggling to find the info.

Also, any tips on wheel changing to smooth the process and avoid rotor damage?

Thanks.

thebishman

Here's the best way to remove wheels and not damage the expensive CCM rotors:

http://www.reverselogic.us/lug-bolt-guides.html

thebishman

And here's,the other piece that makes removing/replacing a wheel a breeze:

https://www.amazon.com/OTC-1580-Stin...ds=wheel+dolly

Foxsasha

Appreciated, thankyou

Randyc151

Look for the lowest weight you can afford for the money. BBS, HRE, OZ and many others make aftermarket wheels for the car, and they know the specs already for our cars. I would not go back with OEM wheels.

I went with HRE P101. Love them!!!

Foxsasha

I'm looking at BC Forged one piece RZ21s, very similar to the P101.

Randyc151

You will be limiting your tire options with that 21" size, but it will look great on the street. I would stick with 20" if you are planning to use Cup2, or go with the GT3RS sizes in a staggered config, although those tires are hard to find.

Foxsasha

The wheel name is RZ21, I'll be buying 20s. Pretty much decided on Cup 2s. Starting to get to know the car a little, only picked it up this week. Been out in it again today. Not the best conditions but the grip the car develops on the lumpy bumpy, tight, mud riddled (from farmers) wet slippery roads is outstanding.

Randyc151

Be careful! You're driving on the wrong side of the road, man!!

Kidding. That actually looks like a gorgeous road for a drive.

SupremePower

Do you have PCCB? If not have you considered the BBS CH-R? 20 x 9 et49 and 11.5?

Foxsasha

It was a lot of fun, suprising so with the conditions. Up and out early tomorrow for another drive.

I do, yes. I'm looking at BC because we already deal with them but that's for the info. The BBS look great.

WheelsB

If you want a wheel that checks all the boxes of what you mentioned above then you'd be doing yourself a disservice if you chose anything but HRE's R101 LW's...

Foxsasha

What size are they and what's the price for a set of OE spec 5 stud 2013 Turbo S?

WheelsB

They are 20"x9" 7.8 kg // 20"x12" 9.2 kg

Will PM you pricing shortly.

Randyc151

+1

Wish they were available when I purchased HRE P101's a couple of years ago.