Jferrante

I know this has been started in numerous threads but none of the links to shop manuals seem to be active that I came across....I am looking for a diagram of the coolant system piping for our cars. I am pinning my lines for one but also have a leak in the rear part of the engine on a hard pipe (below)...and I'd like to do everything I can while it's on stands for the winter.
Also might be selling my kline exhaust...if anyone is interested


Thanks in advance

fung0001

https://www.design911.co.uk/mobile/
i trust you can find it in the pc version

Jferrante

Magnificent thank you!

Jferrante

Looks like I need 16,17, 18 in this anyone know part #'s?

911mhawk

(16) 996.106.214.70 Protective Ring qty2
(17) 996.106.238.71 Joining Ring qty2
(18) 999.707.411.40 O-ring 28.0 x 4.5 qty4

Jferrante

Thank you -
Last Question:

Is 18 one of the "coolant pipes" that will need to be pinned?

911mhawk

No, everything is on top.
Here's 3 of them, I used red locktite with a dab of JB on the bottom of the head too.

Jferrante

you are 2 for 2 i was looking for a pic of the location as well..drained coolant tonight will be piecing together my "pinning" kit shortly.
Looks like i need to drill, spiral tap, and screw and that's it

911mhawk

3/3, a little grease on the tap/bit:

Jferrante

Appreciate this alot - what size hardware did you use? - 4/4 if you can come and do it for me

911mhawk

I'll look in my P-tool box and let you know.
I've been dying to go somewhere sunny this week, maybe you trailer it to COTA and we meet up there, think og the money you'll save doing it ourselves, haha

Jferrante

Haha thanks - i would but have a wedding lol

Third-Reef

I used 8-32 x 3/8 SST SHCS and JB Weld. Here is a picture of my kit.

Jferrante

Can you help me on part number for 15 in the diagram

911mhawk

999.707.410.40