When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Things that make you go, "hhhhmmmm". I am curious. I get what you're saying about the fake factor and that 'vette, although that's just a poorly executed example and a million miles away from the '63, which originally donned the split.
Sorry guys .. I did not get notified of posts to this thread for some reason.
Looks like I need to renew my rennlist membership or something
You can see more on my thread on the 964 board .
but I am selling them for $100 plus shipping . I have shipped a couple to England and that cost about $35 .. everywhere in the us is about $6.
they are 3D printed which leaves them with layering lines.
I spray them down with primer /filler and sand them down a bit to smooth them out. I can get 2 completed in about 2 weeks with the printing time and the finishing.
They come out pretty good as you can see from Gav's photos . but if you want them with a glass like finish you will need to do a little more sanding.
I can print them with or without the raised spine .. I have done both and think the raised spine makes it look more then a flat piece of plastic.
They are attached by sandwiching the grill between the splitter and a **** that screws in to the bottom of the splitter.
takes 2 minutes to put on /take off ..
PM me if you would like one . I will put you on a list .. as I said it does take a bit for me to do them do it might be a while but I will get one to you.
Sorry guys .. I did not get notified of posts to this thread for some reason.
Looks like I need to renew my rennlist membership or something
You can see more on my thread on the 964 board .
but I am selling them for $100 plus shipping . I have shipped a couple to England and that cost about $35 .. everywhere in the us is about $6.
they are 3D printed which leaves them with layering lines.
I spray them down with primer /filler and sand them down a bit to smooth them out. I can get 2 completed in about 2 weeks with the printing time and the finishing.
They come out pretty good as you can see from Gav's photos . but if you want them with a glass like finish you will need to do a little more sanding.
I can print them with or without the raised spine .. I have done both and think the raised spine makes it look more then a flat piece of plastic.
They are attached by sandwiching the grill between the splitter and a **** that screws in to the bottom of the splitter.
PM me if you would like one . I will put you on a list .. as I said it does take a bit for me to do them do it might be a while but I will get one to you.
John, could you please post pics of both iterations?
Your preferred payment method is?
funny no one has ever asked for a flat one before.
here is a picture of one of my prototypes before I designed the raised spine .
forgive the pictures , i just slapped a coat of spray paint on it.
and it is on a 964 but you get the idea. I love the look of the 993 split grill but it was never made for the 964 so I made my own ( I guess I like 993 things I have a 993 cab top on my 964 )
for payment I send out a paypal invoice once I ship the part out and you are happy with it. I do take a while to make them so I do not think it is fair to hold on to your money.
Been busy lately and have not had the time to print. Also was not happy with the quality of the Hobby printer .
I have gotten quite a few asking for a print so I have my design up on Shapeways which is a professional 3D printing company that can produce a product at a much better quality then I can.