Welcome, Lambright's 3rd 928s 1985 White on Brown
#17
Three Wheelin'
I enjoyed your last 928 journey and will certainly follow this one.
FYI. You can rent a proper auto carrier from U Haul for like $25 per day. Might be easier next time around. I am pretty sure that you will be doing more 928 project in the future!
Best of luck.
FYI. You can rent a proper auto carrier from U Haul for like $25 per day. Might be easier next time around. I am pretty sure that you will be doing more 928 project in the future!
Best of luck.
#18
Instructor
Thread Starter
I have a few goals, mostly revenge. I want to get Israel back for attacking the USA on 9/11. It ruined my life and hijacked my marriage.
You'll probably see me on Alex Jones in the next week. If all goes well I'll get his endorsement.
My twitter gets the views.
My Jewish investors think it's a goof and ignore it.
Either way, I'm doing what I love and going for it.
Somebody described me as 'the little engine that said **** it'.
Besides the Porsche, I have been working on my UsedFerrari.com and my UsedMotorhome.com the are gaining mometium. I'm also working on my heliostat. I'll also build the Geodesic Dome this weekend. At least I'll get the pipes and start cutting all 200 of them and than drill them. It's a 24' diameter.
My three major goals the rest will fix itself. Read more if you like on my lambright.com
Have you guys heard of Tinker Cad. I say this because you could be printing some old parts you can't get, like the plastic for the radio of the 79 with the twin post. or at least print the mold to do injection plastic.
black and white are said to be on the moon. ULO unidentified lunar objects. google that.
#19
Instructor
Thread Starter
Stealing is for loser.
and the whole let me see your receipt is an accusation of theft. I'll just sue them. Its not stealing until you leave the doors. They better have much probable cause or I'm going to sue them. I actually see an attorney this week about it. and the employee at safeway telling me to 'suck a bag of dicks'. My only option is to sue or go murder somebody.
#20
Instructor
Thread Starter
I'm turning the box truck into a new service for moving. I'm a moving taxi of sorts. I bring the box truck too you, you load you crap."YOU LOAD NOT WAYNE" I got hurt so I can't be doing heavy lifting. Than I drive the truck to your new spot and you unload it. WHy? cheaper than uhual, less hassle for the public. Think of it as Uber for Box trucks. It should make 200 a day.
#21
Instructor
Thread Starter
I love how scary this photo looks.
That will hold! NOT!
What the ****!
A knot in the wood. ****ing overlooked that. Damn.
Brian seller of truck suggested 2x8x20 doubled up. Sounds good!
#22
Instructor
Thread Starter
Love the story about the groove and flat tire.
#23
Instructor
Thread Starter
I think it's fantastic that Wayne is out there actively working to make his dreams come true.
The cinder blocks with the tie downs to keep them stable under the wood ramps seemed like a potential disaster. Please think of a more stable method before the next one....even putting a tight fitting piece of wood through the holes in the cinder blocks (to keep them centered on each other) would help considerably!
The cinder blocks with the tie downs to keep them stable under the wood ramps seemed like a potential disaster. Please think of a more stable method before the next one....even putting a tight fitting piece of wood through the holes in the cinder blocks (to keep them centered on each other) would help considerably!
I have a plan to attach the ramps to the truck. I have some bolts and holes to be drilled.
#24
Pro
maybe half this s**t should go over to OT, or P&C. Could be way more interesting there. Just sayin.
#25
#27
Rennlist Member
The issue I've found with the process to this point is getting the digital representation accurate enough to allow for a good 3D print.
I've tried coming up with a home 3D rendering, using digital cameras, a digital 2D scanner or a Kinect from an XBox 360, and all options aren't giving me the accuracy that I want.
I sent a few quote requests out to some 3D printers, and they wanted a minimum of $150 for just the scan (of a vent piece).
I'll probably keep messing around, but this will probably fall to the winter as a dedicated project.
#28
Rennlist Member
Hey Wayne,
You're picking up speed! Soon you'll have the market cornered... Instead of 1-800 Got JUNK? You'll be Nationwide with 1-800 GOT A 928?
Anyway... if I could make a suggestion. Maybe if you pre-build something like two Mono 3/2 jack trusses with supports best designed for your use. They will be damn heavy, but if you have the help, it will be much faster and safer. Just a thought! Best of luck!
You're picking up speed! Soon you'll have the market cornered... Instead of 1-800 Got JUNK? You'll be Nationwide with 1-800 GOT A 928?
Anyway... if I could make a suggestion. Maybe if you pre-build something like two Mono 3/2 jack trusses with supports best designed for your use. They will be damn heavy, but if you have the help, it will be much faster and safer. Just a thought! Best of luck!
#30
Be careful and do your best.
Last edited by Daniel5691; 04-24-2016 at 03:39 AM.