GuardsTurbo

My passenger side front fender liner is missing. The screws are there but the panel is missing. Anyone know where I can source a good used one? So far eBay hasn't been of any luck.

MjRocket

Have you tried 928 International?...That would be my first place to check.

ltoolio

Assuming you are talking the arrowed part from the PET below....Checked with Tom at 928intl last week and he said that the ones they get are always broken.

New ones run ~$60. Make sure to get the right one for your MY, as I believe there are at least 3 variations across the run of the cars.

Speedtoys

Where are you?

Alan

Last I looked new ones were available relatively cheaply - and they usually last forever (till someone removes one). 928Intl, Roger etc

Alan

GuardsTurbo

Queens, New York.

Speedtoys

Dang..ok..if you were close I have an moderately OK one in storage, both sides I think.

James Bailey

The foam that fits in the channel and contacts the fender comes separately ......

GuardsTurbo

#9, #8, or both?

ltoolio

The dust shield (8), the foam barrier (9) and the gasket (part 18 on the PET) are all sold separately.

MjRocket

What did you pay for the foam and gasket?

ltoolio

~$7.50 for each part, so around $30 for all 4 (PS & DS)

Mark Anderson

we do not sell the panels used as I've yet to take one off a car that isn't cracked somewhere

worf928

Or until you bottom-out the front air dam. The fenders are nicely flexible and transfer all the impact energy to those splash shields (and the oil cooler if MY'90+.)