When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just wanted to share, I snapped a pic of the motor mounts side by side to see the difference. Not sure how long the old ones have been on the car for, this is at 80k miles
������ thats funny.
Install is easy. 1/2 hour. Spray down the main bolts overnight to break the corrosion down and your done.
I did my spark plugs and AOS at the same time so there was plenty of extra work but as far as the mounts go yes they are very easy...I didnt even spray my bolts down they came off with no problem.
Put a jack under the motor to hold it in place, undo the bottom bolt from each mount and then the two from the top and they come out with no issues. Intake and rear bumper need to be removed also
Put a jack under the motor to hold it in place, undo the bottom bolt from each mount and then the two from the top and they come out with no issues. Intake and rear bumper need to be removed also
I didn't have to remove the rear bumper on mine to do it. There was plenty of room there once you get rid of the air intake.
I'm waiting for mine from Rennline to ship. Apparently there was a 2 week backorder when I ordered them. I did get 10% off from Pelican which was cool....
What made you go with the RL over the Wevo mounts?
A little cheaper ($350 for pair) and I liked the adjustability. They come with street, sport and race bushings. I'm starting with the race ones and then will back off if the vibration is too much.
04-06-2016, 10:05 PM
New vs Old Motor Mounts
