Any Rennlisters from New Zealand?
Rennlist Member
What does a set of 4 RS3's cost?
I agree on the buy on condition. Pel - $15K is big freight for a road car - i didn't see any mod's in that list...........
Mind you - I have just sneezed $6K in tyres, service, wheel alighment and missing spoilers.......
Pel - what does pinning cost?
Dave - I have some unused 214's on 15's you can borrow............ + the instant lower gearing of 15's and low profiles will give you a bit.
(they will go off before I get a car that would benefit from them).
I agree on the buy on condition. Pel - $15K is big freight for a road car - i didn't see any mod's in that list...........
Mind you - I have just sneezed $6K in tyres, service, wheel alighment and missing spoilers.......
Pel - what does pinning cost?
Dave - I have some unused 214's on 15's you can borrow............ + the instant lower gearing of 15's and low profiles will give you a bit.
(they will go off before I get a car that would benefit from them).
Rennlist Member
What does a set of 4 RS3's cost? I agree on the buy on condition. Pel - $15K is big freight for a road car - i didn't see any mod's in that list........... Mind you - I have just sneezed $6K in tyres, service, wheel alighment and missing spoilers....... Pel - what does pinning cost? Dave - I have some unused 214's on 15's you can borrow............ + the instant lower gearing of 15's and low profiles will give you a bit. (they will go off before I get a car that would benefit from them).
I not dissing the 996TT at all, just the NZ new myth. In my ownership I did the following on my NZ new car in two years, on top of maintenance:
1. Fix hand wheel sensor harness break
2. Replace ABS hydraulic pump
3. Replace reverse light switch
4. Replace Transmission mount
5. Replace Door lock
6. Replace Fuel pump
7. Pin blown coolant hose.
8. Replace turn signal switch.
On top of that it had the start of the rear spoiler fault.
Granted it had done 167,000 km so things wear out, but NZ new is not a gold guarantee for a car. Buy on condition.
Any Rennlisters from New Zealand?
What does a set of 4 RS3's cost?
I agree on the buy on condition. Pel - $15K is big freight for a road car - i didn't see any mod's in that list...........
Mind you - I have just sneezed $6K in tyres, service, wheel alighment and missing spoilers.......
Pel - what does pinning cost?
I agree on the buy on condition. Pel - $15K is big freight for a road car - i didn't see any mod's in that list...........
Mind you - I have just sneezed $6K in tyres, service, wheel alighment and missing spoilers.......
Pel - what does pinning cost?
Drifting
What does a set of 4 RS3's cost?
I agree on the buy on condition. Pel - $15K is big freight for a road car - i didn't see any mod's in that list...........
Mind you - I have just sneezed $6K in tyres, service, wheel alighment and missing spoilers.......
Pel - what does pinning cost?
Dave - I have some unused 214's on 15's you can borrow............ + the instant lower gearing of 15's and low profiles will give you a bit.
(they will go off before I get a car that would benefit from them).
I agree on the buy on condition. Pel - $15K is big freight for a road car - i didn't see any mod's in that list...........
Mind you - I have just sneezed $6K in tyres, service, wheel alighment and missing spoilers.......
Pel - what does pinning cost?
Dave - I have some unused 214's on 15's you can borrow............ + the instant lower gearing of 15's and low profiles will give you a bit.
(they will go off before I get a car that would benefit from them).
Rennlist Member
Any Rennlisters from New Zealand?
Originally Posted by Macca
Correct. I did the legwork here and it was not a viable solution.
Im not 100% sure but I thought I read that RS3 were updated in 2014 to a new compound?
Im not 100% sure but I thought I read that RS3 were updated in 2014 to a new compound?
Getting a single MPSS and will look to get it shaved; anyone know a local Auckland outfit that can do this?
Rennlist Member
Yes, they changed the compound. Local Hankook supplier checked throughout their stores in NZ and they only have the older compound in 235/35/19, and newer compound in 305/30/19. Unlikely to change until the local stock is consumed.
Getting a single MPSS and will look to get it shaved; anyone know a local Auckland outfit that can do this?
Getting a single MPSS and will look to get it shaved; anyone know a local Auckland outfit that can do this?
Chris. If your wife's high heels go missing - then you need to start worrying about the Buba stalker! Especially the red ones. He likes cooking at home in those...
Rennlist Member
I knew it was you coz I could hear you over the radio............
Had a 2016 Porsche Festival meeting. The only time I go to the Shore is to go on holiday.............
Rennlist Member
Rennlist Member
John _ I saw Mike and his 993T today at Giltraps. I told him he was being anti-social.......
Polar Silver 993T - VERY desirable........... (almost as desirable as a polar 964T??)
Polar Silver 993T - VERY desirable........... (almost as desirable as a polar 964T??)
One I love is carburetor/carberettor!
I -will- pass ...
I -will- pass ...
Rennlist Member
I haven't seen him since the day we took them all to the track, or at least drove them to the track. As for price, I have lost track of the current market for the Turbo 3.6, but it appears to have eclipsed many other Porsches of the '90s in asking price.
Rennlist Member
Tire Rack is out of stock of 305 MPSS, with no ETA. Picking up the one MPSS tyre locally for $860 inc, but would be keen to get it as close to the other worn rear as possible. Everyone assures me that 2.25mm won't make any noticeable difference, so I could be overthinking this...
Instructor
Join Date: Feb 2015
Location: Auckland, New Zealand
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Instructor
Join Date: Feb 2015
Location: Auckland, New Zealand
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts