Is anyone running Hoosier A6's on a road course
#31
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
considering our experience with the american V8 supercar series and ITE, A6s survive with over 600hp, and up to 30min races. they dont over heat very quickly, they go away near the end of the race, but thats if you are pushing them hard and have the big hp. (we are talking 1:29 lap times at Laguna Seca)
#32
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The A6 advantage is also during the first few laps, you can out run the R6's by a second or two. I ran them last year and thought they were great and they lasted with my 285/30/18 square setup at 2850 lb's. Hoosier did change their A compound a few years ago. They are a recommended running pressure slightly lower than the R6.
I ran this weekend with a set of Goodrich R1's and though they were a little slow out of the box, I chased down and passed several cars once they came up to temperature. They did not fall off on me at the end of a 35 minute race. I ran my fastest time of the weekend at the end of a race with a blown 3rd gear synchro.
I ran this weekend with a set of Goodrich R1's and though they were a little slow out of the box, I chased down and passed several cars once they came up to temperature. They did not fall off on me at the end of a 35 minute race. I ran my fastest time of the weekend at the end of a race with a blown 3rd gear synchro.
#33
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I ran this weekend with a set of Goodrich R1's and though they were a little slow out of the box, I chased down and passed several cars once they came up to temperature. They did not fall off on me at the end of a 35 minute race. I ran my fastest time of the weekend at the end of a race with a blown 3rd gear synchro.
The S is their version of the A6.
Anyone tried these yet ? A few BMW guys used them at the last NASA race.
#35
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The A6 advantage is also during the first few laps, you can out run the R6's by a second or two. I ran them last year and thought they were great and they lasted with my 285/30/18 square setup at 2850 lb's. Hoosier did change their A compound a few years ago. They are a recommended running pressure slightly lower than the R6.
I ran this weekend with a set of Goodrich R1's and though they were a little slow out of the box, I chased down and passed several cars once they came up to temperature. They did not fall off on me at the end of a 35 minute race. I ran my fastest time of the weekend at the end of a race with a blown 3rd gear synchro.
I ran this weekend with a set of Goodrich R1's and though they were a little slow out of the box, I chased down and passed several cars once they came up to temperature. They did not fall off on me at the end of a 35 minute race. I ran my fastest time of the weekend at the end of a race with a blown 3rd gear synchro.
Thanks for the feedback.
What hot pressures were you running?
#37
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
i have a half of a set of the Goodyear R1s. Rylan was using them in his 600hp S2000 with good sucess vs the Rs . now , i have to find a pair of used 305-315 of the goodyears to make a set.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#39
Race Car
Join Date: Apr 2005
Location: With A Manual Transmission
Posts: 4,728
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have been running A6 exclusively since December last year, 6 events and a couple of test days, all but one event competition. I have only gone through 2 sets and I only moved from one set because of a cut on the inner shoulder of a rear tire.
For me 26 cold and 36 hot is just right. Less than that and the tread squirms too much, especially when there is high compression. They are not the same (still fast though) when the temps get above about 80*. However they do last, I have run 1.2 seconds slower than my PB with 18+ HC on the tires. Also have run 10 lap sessions in traffic within 2-3 seconds of PB. I could run a whole race on them.
My car is 3100-3250 (depending on who I'm running with) and about 600 crank hp.
If just for Qualifying DO IT! Try to get those first 3-4 laps as clean as possible those, that is where the magic happens. In cooler weather you can let it hang out more, when it's cold, they LOVE it.
Dave, they are better lb for lb in NASA vs slicks IMO. I'd have to run 200+ extra lbs or almost 75 whp vs slicks with NASA. The R80/100 are not worth that much time IMO over a 200 lb lighter car on A6.
I should have some slightly used practice extra's after I complete my stockpile for NASA nationals, if you want to try them for a couple of sessions, let me know.
For me 26 cold and 36 hot is just right. Less than that and the tread squirms too much, especially when there is high compression. They are not the same (still fast though) when the temps get above about 80*. However they do last, I have run 1.2 seconds slower than my PB with 18+ HC on the tires. Also have run 10 lap sessions in traffic within 2-3 seconds of PB. I could run a whole race on them.
My car is 3100-3250 (depending on who I'm running with) and about 600 crank hp.
I should have some slightly used practice extra's after I complete my stockpile for NASA nationals, if you want to try them for a couple of sessions, let me know.