Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   Racing & Drivers Education Forum (https://rennlist.com/forums/racing-and-drivers-education-forum-65/)
-   -   FS: Price Reduced! 911 Racer w/GT3 Cup Motor (https://rennlist.com/forums/racing-and-drivers-education-forum/655374-fs-price-reduced-911-racer-w-gt3-cup-motor.html)

claykos 09-17-2011 12:54 PM

FS: Price Reduced! 911 Racer w/GT3 Cup Motor
 
New Price of $49k!


For sale, unique and awesome early chassis, WATER COOLED 911. 1974 911 tub, 993 rsr wide body work, and of course 996 GT3 CUP Drivetrain!! This car is extremely fast and will run with just about any 996 or 997 cup. Everyone drools over this car and I would say it is the ultimate vintage/modern Porsche marriage.

Legal for NASA ST1 and GTS5, has NASA and PCA log books.

Extremely fast:
1:03 at PIR (would be good for top 5 grid spot the last time Rolex raced there)
0:57 at Firebird East (NASA record holder)
1:03 at Firebird Main (NASA record holder)
1:44 at Cal Speedway (easily capable 1:42s according to the data)

Chassis:
1974 911 Tub, rust free
~2250 lbs wet (no driver)!
Full safety devices cage installed and modified by FABCAR, fully tied to front and rear suspension
ATL fuel cell ~1.5 yrs old
Amazing cooling system with a single huge radiator vented through hood
Water and oil stay below 200 even in 100 degree+ Arizona racing weather.

Interior:
Recaro ProRacer HANS seat
Schroth Belts
Custom steering colum
Tilton floor mount pedal set up
Full STACK Data system with GPS, throttle, steering, G-force, etc

Body:
All fiberglass 993 extra wide body
60 inch carbon banana wing

Drivetrain:
2000 gt3 cup engine w/~2 hrs since refresh by Chris Cervelli
Just over 350 rwhp before refresh
996 cup rear chassis wiring, very nicely done
2000 gt3 cup G96 6 speed cable shift gearbox (NOT EASY TO FIT!)
Close ratio gears for ~160 mph top speed
~25 hrs on gearbox since refresh
2004 Cup diff
Tilton 7.25 clutch 2 plate clutch, full thickness on discs

Front Suspension:
Full ERP 935 monoball
JRZ 3-way adjustable remote reservoir struts with dropped spindles
18x10" fikse wheels w/ 265/645/18 hoosier slicks
930 Brakes

Rear Suspension:
Full ERP 935 setup
930 trailing arms
JRZ 3-way shocks
930 Brakes
18x12" fikse wheels with hoosier 320/650 tires

Extras:
Spare shift cables
3 sets total Fikse wheels
Probably some other stuff I am forgetting...

The car is running flawlessly. It has been disassembled for several months, but we just put the engine back in fresh from Chris Cervelli and ran it for about 2 hours of testing a few days ago. Performed perfectly, ran all day without any issues. Car is ready to race. Full thickness on pads and rotors, completely fresh.

It would cost WELL into the 6 figures to have a shop duplicate this car. It is incredibly quick and nimble with modern watercooled power and 500 lbs lighter than a 996 cup with much larger tires!

Video at Cal Speedway:

Video at Firebird East:
http://video.google.com/videoplay?do...7709839788208#

Location: Tucson, AZ
Contact: claykos AT gmail.com

http://lh6.ggpht.com/_BjjFoMfAMUQ/TS...ck_car_pir.jpg

http://lh3.ggpht.com/_BjjFoMfAMUQ/TS...k_porsche1.jpg

http://lh4.ggpht.com/_BjjFoMfAMUQ/TS...0/PICT0020.JPG

KaiB 09-17-2011 03:01 PM

Dang Clay, I wish this car would sell. I really don't need it, but....

claykos 10-15-2011 02:39 PM

Still available...feeling more motivated to sell.

claykos 10-29-2011 02:35 PM

$45k takes it - I want this car sold.

bobt993 10-30-2011 10:51 AM

Clay, I am working on it with CJ. We may come out and see you.

claykos 10-30-2011 01:24 PM


Originally Posted by bobt993 (Post 8985008)
Clay, I am working on it with CJ. We may come out and see you.

Great. Let me know if you have any questions. Feel free to give me a call. I emailed a bit with him yesterday.

-Clay

claykos 11-04-2011 09:21 PM

Lots of new interest but not sold yet...

claykos 11-06-2011 11:33 PM

Pulled the car out today and took some a few new pictures and a short video. She fired right up and purred!

Car is ready to race, hop in, turn the key and go kick some butt.


https://lh6.googleusercontent.com/-7...-04-39_112.jpg

https://lh4.googleusercontent.com/-j...-05-01_379.jpg

https://lh4.googleusercontent.com/-q...-06-20_176.jpg

claykos 11-19-2011 03:35 PM

Can't believe I still have this, but it is still available!

claykos 12-01-2011 12:16 AM

Would very much like to have this gone by end of the year...

early_grayce 12-01-2011 08:26 AM

$49k???
Jeeeeezzz....
What has the economy done to this forum.... no buyers?

At that price you should just part it out, you'd come out ahead.

claykos 12-05-2011 10:31 PM


Originally Posted by early_grayce (Post 9066333)
$49k???
Jeeeeezzz....
What has the economy done to this forum.... no buyers?

At that price you should just part it out, you'd come out ahead.

Lots of tire kickers, but no buyers.....I know it is at the point I could make more parting it out. 3 way jrzs, 3 sets of fikses, a whole pile of hoosiers, cup engine, cup gearbox....the list goes on.

I have pulled the seat out of the car and I will sell for $43.5k.

claykos AT gmail.com

Astroman 12-05-2011 10:40 PM

What is scaring people away? Obviously it isn't the price.

claykos 12-05-2011 10:48 PM


Originally Posted by Astroman (Post 9078890)
What is scaring people away? Obviously it isn't the price.

No Idea? The pink roll cage?

The car still holds 2 track records with NASA that have stood for over a year. Won most of the races I entered with it, it's fresh and ready to go.

analogmike 12-05-2011 11:07 PM

I see a 935 conversion w/ 996TT engine with 600HP...


All times are GMT -3. The time now is 02:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands