Non airbag streering wheel install - resistor question???(cross post from 993 forum)
04-20-2009, 05:29 PM
#1
Drifting
Thread Starter
Join Date: Jul 2006
Location: ..."RECALCULATING"
Posts: 3,496
Likes: 0
Received 0 Likes
on
0 Posts
Non airbag streering wheel install - resistor question???(cross post from 993 forum)
Anyone know how the best resistor size for a 993 (with a 4 spoke airbag steering wheel) to jump the airbag lead after removal of the the stock wheel to "fool" the airbag ECU (ie keep the light off and keep the passenger airbag working)???
04-20-2009, 06:12 PM
#4
Drifting
Thread Starter
Join Date: Jul 2006
Location: ..."RECALCULATING"
Posts: 3,496
Likes: 0
Received 0 Likes
on
0 Posts
found it...but had ot blow the dust off of it.
Gert recommended a 2.8 ohm resistor...and after some back and forth on the wattage it appears a 1/4 watt resistor will do fine.
Will keep looking just to see, but I thought it was somewhere between 2 and 4 ohms.
Gert recommended a 2.8 ohm resistor...and after some back and forth on the wattage it appears a 1/4 watt resistor will do fine.
Will keep looking just to see, but I thought it was somewhere between 2 and 4 ohms.
