Rennlist - Porsche Discussion Forums
Page 2 of 2
1
2
Show 500 post(s) from this thread on one page

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   Racing & Drivers Education Forum (https://rennlist.com/forums/racing-and-drivers-education-forum-65/)
-   -   Coolsuit MOUNTING (https://rennlist.com/forums/racing-and-drivers-education-forum/1056412-coolsuit-mounting.html)

mglobe 03-10-2019 07:56 PM
Originally Posted by ApexPerformance (Post 14866096)
Here's a link to the mounting tray from Cool Shirt FYI. Not inexpensive but quick easy way to get the mounting done if you don't want to fabricate anything.

https://apexperformance.net/product/mounting-tray/
I’ve got that tray and love it because you can open the cooler and add ice without removing the straps. ...unfortunately the series I’m running in makes me put a ratchet strap over the cooler in addition. :banghead:

Thundermoose 03-10-2019 08:33 PM
1 Attachment(s)
Here's mine. I have a carabiner to make it easy to remove.

sbelles 03-10-2019 11:13 PM
Originally Posted by dbbarron (Post 15693698)
Then how is the tray itself secured? With additional bolts through the eyebolts into the side flanges of the tray using conventional bolts?
Originally Posted by dasing (Post 15694208)
The corners of the Coolshirt tank are rounded. So if you put the bolts through the bottom the of the tray, but in the four corners, then the tank won't interfere.


https://cimg6.ibsrv.net/gimg/rennlis...43c4d92280.jpg

PS Now that I look at the bottom of the tank, I see it has feet on it. Those would help too.
Originally Posted by Thundermoose (Post 15694425)
Here's mine. I have a carabiner to make it easy to remove.
Mine is a hybrid of these two. I have the tray bolted in the corners with fairly small bolts. I use a strap like Thundermoose's with S hooks attached to two eye bolts. I hate the straps that comes with the tray and this holds it really tight.

Steve113 03-11-2019 11:13 AM
https://apexperformance.net/product/mounting-tray

I use it mounted to passenger side where seat bracing is in the floor

dbbarron 03-12-2019 11:04 PM
I used M8 bolts with washers in the corners of the tray.
I cut the bolts to the minimum length needed to avoid the additional protrusion under the car.

Stable Energies 03-13-2019 06:03 PM
We just wanted to throw a couple photos into the mix.

This is the install we did for one of our clients 997 Street-Full Track conversion.

https://cimg0.ibsrv.net/gimg/rennlis...39ec6efd36.jpg
Floor mounting
https://cimg1.ibsrv.net/gimg/rennlis...dcc5c4f6e1.jpg
Floor Mounting
https://cimg3.ibsrv.net/gimg/rennlis...ac75d4d5b2.jpg
Cooler tie-down

Steve113 03-13-2019 07:18 PM
Bob that's a great set up. You guys do great work and have a great inventory

dbbarron 03-13-2019 08:41 PM
Done with mine - here's some pics:
https://cimg6.ibsrv.net/gimg/rennlis...5ca3dc1641.jpg
https://cimg7.ibsrv.net/gimg/rennlis...079699834d.jpg

Stable Energies 03-14-2019 10:04 AM
Originally Posted by Steve113 (Post 15701857)
Bob that's a great set up. You guys do great work and have a great inventory
Thank you Steve! We try our best.

Digitalwave 03-14-2019 01:33 PM
I made a small bracket setup out of angle aluminum, similar to Stable's photos.

FFaust 03-17-2019 12:16 AM
Originally Posted by dbbarron (Post 15702030)
Nice, but what I want to know is, did you just yank the carbon canister, or did you have to do something with the hoses?


All times are GMT -3. The time now is 04:21 PM.
Page 2 of 2
1
2
Show 500 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands