Skibum1963

Does anyone know if the gen I 996 cups had a throttle position sensor? My 2002 cup has an AIM MXL pista and there is no throttle position sensor input when I interrogate it through race studio 2.

amso3

If you have the MS 3 ECU, which started with 02 Cups, then you will get throttle angle. It will not max at 100 but will provide a nice trace

Skibum1963

Thanks! I'll check for this tonight.

Slakker

Pre 02 I believe is the Bosch 5.2.2 ECU. It outputs CAN data at 500kbps but you have to add wires to the ECU harness to get access to it. Kgorman did a great write-up on it. You can get throttle position, RPM and outside temp.

Unfortunately, while Motec and Racelogic have both taken the time to write an interface for it, AIM hasn't yet. It may be possible to create one with the latest RS3 release but it's beyond my capabilities.

Matt Romanowski

The CAN writer in RS3 is only for the new products. It will not work for the MXL Pista.

Skibum1963

False alarm. The throttle position data is there, but is not labeled as such in the race studio 2 measures column. It was labeled "P911 PPS" as a percentage. Thanks everyone.

amso3

Yes, PPS is "Pedal Position Sensor" and TPS is "Throttle Position Sensor"