redmonkey928

Clearing out some spares that are excess and general spring cleaning:

997 Cup/Motorsports Parts:

$275 - Front PFC 08 Endurance Pads, used, worn as shown in the photo (fit 997 GT3 Cup and other models unsure of)

$599 shipped - 997 Cup car headers, 100 cell cats (997.113.021.95 and 997.113.022.95), left side is bent/right side in good usable condition

$500 shipped - OEM Porsche 997 Cup brake rotor hats, three total

$900 shipped - (Two) GKN blue motorsports rear drive shafts, unknown hours but no damage and has been refreshed prior to storage on both (same part # on both 997.332.024.90)

$450 shipped - (One) GKN blue motorsports rear drive shaft, unknown hours but no damage and has been refreshed prior to storage (997.332.024.90)

$950 shipped - Complete set of PWR radiators for 997 GT3/Cup, includes center plus left/right sides

$300 shipped - Single/left side PWR radiator

$150/ea. shipped - 997 single Cup shifter cable (997.424.040.90)

$325 plus shipping - pair of stock radiators (997.106.131.02 and 97.106.132.02)

$800 shipped - Steering gear with inner connecting rods (997.347.011.09 and 991.341.831.8C)

$250 shipped - Pair of 997 GT3/Cup side exhaust hangers (997.111.247.90 and 997.111.248.90)

$200 shipped - Bosch Motorsports Alternator (996.603.019.90)

$200 shipped - Pair of OEM GT3/Cup trailing arms (997.331.043.01)

$475 shipped - 997 BBS Cup 18"x12" rear wheel, will clean up nice, straight and true.

SOLD - OEM airjacks, unsure if it is front or rear (Early 997 RSR spec, part numbers shown), two total (one for sure need rebuild, other could be used)

$250 shipped - OEM 997 GT3 Cup clutch, 2.5-2.7mm clutch thickness across all discs (997.116.930.90)

997/991 GT3 Street Parts:

$1000 shipped - 991/997 GT3 rear center muffler - (997.111.027.92, and includes mounting straps 997.111.119.70)

$250 shipped - OEM 991 GT3 muffler tips, satin black, used for under 1k miles (991.111.253.90)

redmonkey928

Just looking to pass along spare pieces, will trade for 997 Cup parts if others are in a similar situation.

Looking for 997.1 Cup wheels if that helps

Toby Pennycuff

Will the PWR radiators fit/work on a 996 Cup?

redmonkey928

Cant say for certain, I am sure someone could add some insight on the forums as to the fit of them on a 996.

redmonkey928

Few parts added.

redmonkey928

Updated.

redmonkey928

BBS rear Cup wheel added.

redmonkey928

Some more items to add:

$350 - 997 GT3 Cup vented quarter panel windows

$500 - OEM airjack, unsure if it is front or rear

$500 - OEM 997 GT3 Cup clutch, two weekends use on it, 2.5-2.7mm clutch thickness across all discs

redmonkey928

Few photos added.

Includes 997 Cup headers, air jacks, and brake rotor hats.

wchai

Hi, do you have the center radiator support brackets for sale? Thanks.

redmonkey928

Do you have a part #? My guess is you are talking about the pieces that mount to the front of the tub and hold the backside of the front radiator?

wchai

Hi, sorry I do not have the part number handy but yes, I am talking about all of the support/duct pieces attached to the back of the Cup or GT3 radiator all the way to the smiley vent at the top of the bumper. I am working on my own project and I need to find OEM radiator support that would allow me to fit GT3 radiator to my 2006 C2S. Sort of shot in the dark at this point.

Thanks very much.

redmonkey928

No, those vary from year to year also. The 09' I believe is different than the earlier gen 997 Cup TB's.

Kannacher GT

Hello, the Pair of 997 GT3 / Cup side exhaust hangers (997.111.247.90 and 997.111.248.90) is still for sale. Can you ship the holders to Germany?