997 RSR uprights, decklid, wing
#1
Former Vendor
Thread Starter
997 RSR uprights, decklid, wing
curious if anyone here has the 997 RSR uprights, decklid , wing, etc.....
considering putting it on my 997 Cup.
had a decklid failure today, was going fast into turn 1 at NJMP and my decklid delaminated, wing and uprights came flying off, not sure how i didnt wsate the car or the tires, but it wasnt pleasant.
im going to go with the RSR setup. the wing uprights to the chassis and a simple decklid that pins on/off.
anyone got thoughts or ideas, have the pieces, have other ideas?
thanks in advance.
happy new years
considering putting it on my 997 Cup.
had a decklid failure today, was going fast into turn 1 at NJMP and my decklid delaminated, wing and uprights came flying off, not sure how i didnt wsate the car or the tires, but it wasnt pleasant.
im going to go with the RSR setup. the wing uprights to the chassis and a simple decklid that pins on/off.
anyone got thoughts or ideas, have the pieces, have other ideas?
thanks in advance.
happy new years
Last edited by ZSA Motorsport; 12-30-2011 at 09:15 PM.
#2
Instructor
Join Date: Jul 2006
Location: Manchester, NH
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
165mph into turn #1 is quite impressive sorry to hear about the delamination. Rick Deman had a similar situation at Sebring on the back stretch if I am not mistaken a couple years back with an aftermarket decklid on an RSR. I have a set of brand new RSR uprights that were purchased for the 24hr race last season as spares and never used. If you are interested in them let me know. I also have the factory RSR trailing arms and wishbones.
you can email at:
nmercier853@hotmail.com
you can email at:
nmercier853@hotmail.com
#3
Former Vendor
Thread Starter
165mph into turn #1 is quite impressive sorry to hear about the delamination. Rick Deman had a similar situation at Sebring on the back stretch if I am not mistaken a couple years back with an aftermarket decklid on an RSR. I have a set of brand new RSR uprights that were purchased for the 24hr race last season as spares and never used. If you are interested in them let me know. I also have the factory RSR trailing arms and wishbones.
you can email at:
nmercier853@hotmail.com
you can email at:
nmercier853@hotmail.com