FS: 997 Cup "Grand Am spec" front wheel carriers(uprights)
#1
Rennlist Member
Thread Starter
FS: 997 Cup "Grand Am spec" front wheel carriers(uprights)
Selling a pair of 997 Cup Grand Am spec front wheel carriers(aka uprights).They are brand new from PMNA. They are complete with factory installed wheel bearings, hub flanges, wheel studs, and stub axle bolt. They were factor built for Grand Am spec Cup cars from 2008-2011.
Part #'s for these complete wheel carrier assemblies are:
997.341.091.93 Left
997.341.092.93 Right
The bare wheel carrier part #'s are(same as 2004-2005 RSR):
996.341.157.9E Left
996.341.158.9E Right
What's unique about these wheel complete wheel carrier assemblies are:
1) The brake caliper mount spacing is 210mm to fit Brembo RSR Endurance caliper or Stoptech STR60GT Endurance caliper or any other caliper endurance caliper with 210mm bolt spacing(I think AP Racing also has caliper to fit).
2) the 5-stud hub flange, has M14x1.5 thread wheel studs that fits on standard 5-lug wheels.
I order these for a project but had a change of plan. Selling both for $2100. Buyer pays Paypal fee and shipping.
Great as spare parts if you have a Grand Am spec Cup car.
Or swap out the 5-lug hub flanges and use them as RSR carriers.
Or make caliper brackets for use in other applications including street car.
Notes: The Right side carrier has two surface blemish, that's how it was delivered from PMNA. The Left side hub flange is different color than the Right, that's how it was delivered from PMNA.
Part #'s for these complete wheel carrier assemblies are:
997.341.091.93 Left
997.341.092.93 Right
The bare wheel carrier part #'s are(same as 2004-2005 RSR):
996.341.157.9E Left
996.341.158.9E Right
What's unique about these wheel complete wheel carrier assemblies are:
1) The brake caliper mount spacing is 210mm to fit Brembo RSR Endurance caliper or Stoptech STR60GT Endurance caliper or any other caliper endurance caliper with 210mm bolt spacing(I think AP Racing also has caliper to fit).
2) the 5-stud hub flange, has M14x1.5 thread wheel studs that fits on standard 5-lug wheels.
I order these for a project but had a change of plan. Selling both for $2100. Buyer pays Paypal fee and shipping.
Great as spare parts if you have a Grand Am spec Cup car.
Or swap out the 5-lug hub flanges and use them as RSR carriers.
Or make caliper brackets for use in other applications including street car.
Notes: The Right side carrier has two surface blemish, that's how it was delivered from PMNA. The Left side hub flange is different color than the Right, that's how it was delivered from PMNA.
#2
Rennlist Member
Thread Starter
Sale pending.