Purchasing new 991.2 Cup - Advice?
#1
Advanced
Thread Starter
Purchasing new 991.2 Cup - Advice?
I’m about to take the leap and order a new 991.2 Cup from PMNA. Looking for any advice on the purchase process, options (heard there are none), and setup suggestions. I’m currently racing BMW CCA and track a 991.1 GT3RS. Located in Northern California. Thanks!
#2
Burning Brakes
You planning to run the car yourself or use a local race shop? There's great local options and they'll be able to help you with all those things... just a thought.
-mike
-mike
#3
Nordschleife Master
Your world is about to be turned upside down. The Gen II cars have even more power than the Gen 1s which are AMAZING..... Are you planning any pro things like IMSA GT3 or Pirelli? You getting ABS? Read a lot of the posts here as they still apply to your GenII. This is a much different car in every way from what Porsche has produced before. Make sure your shop is up to the task AND HAS THE EXPERIENCE. Dont let them learn on your car. Also get ready and start learning Cosworth....
#4
Advanced
Thread Starter
My desire is to start with PCA club then work towards Pirelli. Yes, will work with a team. Understand these aren’t a 2-man-in-a-garage cars.
Now the challenge is the series requirements from PMNA. To get a standard Cup car they want a commitment is a series. Which is my eventually destination. For PCA level they are pushing the PCA version of the car which looks awesome, has ABS, etc. But does not qualify for IMSA or PWC...
So I can buy the PCA version and be stuck at the club level or buy the standard cup and be thrown in the deep end of the pool.
Not sure what PMNA is thinking offering a more expensive Club car (with expensive carbon fenders and doors). But I do like the blue paint :-)
Now the challenge is the series requirements from PMNA. To get a standard Cup car they want a commitment is a series. Which is my eventually destination. For PCA level they are pushing the PCA version of the car which looks awesome, has ABS, etc. But does not qualify for IMSA or PWC...
So I can buy the PCA version and be stuck at the club level or buy the standard cup and be thrown in the deep end of the pool.
Not sure what PMNA is thinking offering a more expensive Club car (with expensive carbon fenders and doors). But I do like the blue paint :-)
#5
Burning Brakes
What team are you working with? They should be able to sort all this out. The same chassis will work in any of the 3 series (IMSA GT3 Cup, Pirelli Drivers Cup or PCA), there's only slightly different parts on the car that are permitted in some and not the other (like ABS). The shop should know all this and be able to work with PMNA to get you the chassis without any problem.
I've had lots of experience and success with Jerry Wood Enterprises in Campbell and Flying Lizard up at Sonoma. They'd be handling all this stuff so you don't have to sweat about it or read the rule books to learn the finer details of each individual series.
-mike
I've had lots of experience and success with Jerry Wood Enterprises in Campbell and Flying Lizard up at Sonoma. They'd be handling all this stuff so you don't have to sweat about it or read the rule books to learn the finer details of each individual series.
-mike
#6
Nordschleife Master
Do not get anything other than a full Pro car. You will regret it when you go to sell it. So hit the deep end with IMSA or Pirelli if you have the $$$(minor detail). If you are a good driver you will be at least in the pack. Cool to see yourself on TV. Get practice at PCA events. LOTS of the teams do this. More than half the 991 cups are running in Pro series.
#7
Rennlist Member
I looked at that car a few weeks ago, and I don't think its a good foray into SRO or PCA.
As of now, it doesnt have a PCA home, and being "limited" you will have no one to race. Not to mention, the carbon bits are not going to be cheap....
As of now, it doesnt have a PCA home, and being "limited" you will have no one to race. Not to mention, the carbon bits are not going to be cheap....
Trending Topics
#9
Rennlist Member
Join Date: Feb 2006
Location: Wishing I Was At The Track
Posts: 13,512
Received 1,720 Likes
on
913 Posts
My desire is to start with PCA club then work towards Pirelli. Yes, will work with a team. Understand these aren’t a 2-man-in-a-garage cars.
Now the challenge is the series requirements from PMNA. To get a standard Cup car they want a commitment is a series. Which is my eventually destination. For PCA level they are pushing the PCA version of the car which looks awesome, has ABS, etc. But does not qualify for IMSA or PWC...
So I can buy the PCA version and be stuck at the club level or buy the standard cup and be thrown in the deep end of the pool.
Not sure what PMNA is thinking offering a more expensive Club car (with expensive carbon fenders and doors). But I do like the blue paint :-)
Now the challenge is the series requirements from PMNA. To get a standard Cup car they want a commitment is a series. Which is my eventually destination. For PCA level they are pushing the PCA version of the car which looks awesome, has ABS, etc. But does not qualify for IMSA or PWC...
So I can buy the PCA version and be stuck at the club level or buy the standard cup and be thrown in the deep end of the pool.
Not sure what PMNA is thinking offering a more expensive Club car (with expensive carbon fenders and doors). But I do like the blue paint :-)
If it were me and the goal was ultimately IMSA or PWC I would get a standard Gen II Cup, add ABS, and deal with running non-spec PCA class until they change the rule.
Last edited by Nizer; 07-30-2018 at 09:56 PM.
#10
Pro car would be the way to go. I wouldn’t be too concerned with PCA classification if a pro series is your goal. Depending on your skill level, I would highly recommend a coach and a solid team to look after the car.
#11
Intermediate
Join Date: Mar 2018
Location: South Florida
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2017 .2 cup for sale if you are interested, PMNA will not sell you a car unless you are comitted to a series. I am more than happy to answer any questions or help you out in any way possible, just shoot me a DM!
#12
Advanced
Thread Starter
Yes, Confused :-)
Heard rumors that the PCA version will be limited to 10-20 cars. So there won’t be a big field at PCA races.
I had a local team with a buying history with PMNA try to get a standard Cup without a full series commitment. PMNA didn’t budge.
Might be possible to get the PCA version and later convert fenders and doors to standard Cup to run in PWC. An expensive route...
Heard rumors that the PCA version will be limited to 10-20 cars. So there won’t be a big field at PCA races.
I had a local team with a buying history with PMNA try to get a standard Cup without a full series commitment. PMNA didn’t budge.
Might be possible to get the PCA version and later convert fenders and doors to standard Cup to run in PWC. An expensive route...
Just be aware that current PCA rules don't allow the PCA Edition Cup to run in the spec Cup class (GTC7). Confused? You should be. Normally PCA follows the spec that IMSA uses for GT3 Challenge but this year IMSA allowed the use of ABS for drivers running Masters class in GT3 Challenge however PCA didn't follow suit. A number of us have petitioned PCA to allow ABS in the spec class as it makes for safer and ultimately less expensive racing, but so far they've denied the rule change. I think PCA is being short-sighted because it pushes Cup owners running ABS to explore other series, plus PCA should support anything that reduces costs and reduces the risk of contact.
If it were me and the goal was ultimately IMSA or PWC I would get a standard Gen II Cup, add ABS, and deal with running non-spec PCA class until they change the rule.
If it were me and the goal was ultimately IMSA or PWC I would get a standard Gen II Cup, add ABS, and deal with running non-spec PCA class until they change the rule.
#13
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Yes, Confused :-)
Heard rumors that the PCA version will be limited to 10-20 cars. So there won’t be a big field at PCA races.
I had a local team with a buying history with PMNA try to get a standard Cup without a full series commitment. PMNA didn’t budge.
Might be possible to get the PCA version and later convert fenders and doors to standard Cup to run in PWC. An expensive route...
Heard rumors that the PCA version will be limited to 10-20 cars. So there won’t be a big field at PCA races.
I had a local team with a buying history with PMNA try to get a standard Cup without a full series commitment. PMNA didn’t budge.
Might be possible to get the PCA version and later convert fenders and doors to standard Cup to run in PWC. An expensive route...
Have you considered the Pirelli Trophy West USA? This is a west coast based series that we have developed many drivers through on their way to PWC/IMSA?
Tracks are west coast based and there are plenty of 991.2 Cups to compete against, most of them AM drivers, except for a few very experienced drivers.
Here is the website: http://www.competentmotorsport.com/
My email is James@gmgracing.com if you need anything else or have any other questions.
__________________
James F. Sofronas | President & Owner
Global Motorsports Group ™
E: james@gmgracing.com
P: +1 (714) 432-1582
F: +1 (714) 432-1590
A: 3210 South Shannon Street, Santa Ana, California 92704
W: gmgracing.com
James F. Sofronas | President & Owner
Global Motorsports Group ™
E: james@gmgracing.com
P: +1 (714) 432-1582
F: +1 (714) 432-1590
A: 3210 South Shannon Street, Santa Ana, California 92704
W: gmgracing.com
#14
Advanced
Thread Starter
Thanks all for the info and advice! Based on feedback I decided to commit to the Pirelli Cup West and order a new 991.2 from PMNA. Car should arrive in September! Now lots to learn— Can’t wait!