chrcook

All prices + shipping (i.e.: amount doesn’t include shipping)
Pictures available upon request
PM or christiancook43 at yahoo dot com

P/N, description, quantity, condition, price (excluding shipping), condition

Engine
996.111.101.95 exhaust manifold left 1 SOLD Good
996.111.102.95 exhaust manifold right 1 SOLD Damaged, but repairable
996.375.011.94 Engine blade 2 SOLD Fair 1x red, 1x black, both warped
996.106.057.03 water tank (includes ventilation valve / pressure cap) 1 SOLD Good
996.106.131.51 radiator left 1 SOLD Good
996.106.132.51 radiator right 1 SOLD Good
996.606.128.00 O2 Sensor 2 SOLD for both Good
Multiple Complete collection of coolant hoses & brackets SOLD Good
Custom straight exhaust pipes, right and left (removes muffler) $200 New
Walbro GSS307BX Fuel pump / pick up for fuel cell 2 $50 for both Good

Electrical
996.603.019.90 generator 90 Ampere (Bosch Motorsports Alternator) 1 SOLD Good
996.604.107.00 Starter 1 SOLD Fair; teeth are worn at tip
996.602.104.00 ignition coil 6 $60 for all 6 Good

Brakes
996.352.425.92 brake caliper left red 1 SOLDFair; cosmetically rough
996.352.426.92 brake caliper right red 1 SOLD Fair; cosmetically rough
AP Racing Ft rotors w/ hats, 350mm floating 2 SOLD for pair Excellent, <6 hours
AP Racing Ft rotors w/out hats, 350mm floating 2 SOLD for pair Good, some cracking
AP Racing Rear rotors w/ hats, 330mm floating 2 SOLD for pair Good

Transmission / Drivetrain
996.424.010.9A gearshift-lever bracket (shifter) 1 SOLD Fair; looks rough, OK tightness
996.424.040.75 control cable (shifter cables) 2 SOLD Good
996.423.229.92 rear throttle control cable 1 $100 Good
996.116.013.91 clutch disk 1 $50 Good thickness, can measure
996.116.027.75 pressure plate (Sachs P/N: 88-3082-999-752 ) 1 $300 New
996.116.237.90 clutch operating cylinder 1 $75 Good
950.116.813.30 guiding tube 1 $25 Good
950.116.086.06 release fork 1 $50 Good
944.116.080.01 release bearing 1 $25 Good
Tilton 3-plate clutch disk + plates, 5.5" dia 1 $100 Good thickness, can measure
Tilton Complete assembly, 3-plate, 5.5" dia (clutch plates, spacers, cage, flywheel, etc) SOLD

Suspension
996.341.131.90 tensioning bolt ABS 48 tooth (axle) 2 SOLD Good 1x <6hrs, 1x hours unknown
996.341.121.90 wishbone outside front left (lower control arm, adjustable) 2 SOLD
996.341.122.90 wishbone outside front right (lower control arm, adjustable) 2 SOLD
996.331.241.04 rubber bearing (inner bushing for lower control arm) 2 SOLD New
996.331.121.90 wishbone outside left+right (lower control arm, non-adjustable) 3 SOLD 2x <6 hours, 1x unknown hours
996.331.121.90 wishbone outside left+right (lower control arm, non-adjustable) 1 $200 ~24 hours
996.331.112.06 upright right (right rear carrier, full assembly) 1 $750 New
996.332.024.23 articul. shaft (rear axle, black) 3 $100ea Used; unknown hours
996.331.671.90 central bolt (stub axle) 8 $100 for set of 4 Used; unknown hours; 1 set PMNA, 1 set Demon Speed
964.361.113.70 pressure disk for BBS rim 8 $100 for set of 4 Used

Body
996.512.991.9B Rear cover without wing (decklid) w/ gurney flap 1 SOLD Repaired damage underneath
996.512.992.90 rear wing 1 $1,000 Carbon; Crawford mfg
996.512.981.92 wing support left 1 SOLD Good
996.512.982.92 wing support right 1 SOLD Good
996.631.485.00 tail lamp left 1 SOLD Fair, minor damage on bottom
996.631.486.00 tail lamp right 1 $25 Used, major damaged to lens

Interior
993.347.084.70 steering wheel + hub 1 SOLD Fair; hub assy new

Wheels
996.362.207.90 front outside-ring 1,0x18 (BBS wheel half) 2 SOLD Good
996.362.209.90 rear outside-ring 1,5x18 (BBS wheel half) 2 SOLD Good
996.362.203.91 front inner-ring 7.5x18 (BBS wheel half) 2 $100ea Good
996.362.205.91 rear inner-ring 9,5x18 (BBS wheel half) 2 SOLD Good
996.362.221.90 sealing ring (metal ring + seal) 3 $25ea Good
BBS 0229021 wheel center, early style 2 $150ea Fair; Cosmetically rough; some rub marks on inside
BBS 0229052 wheel center, late style 1 SOLD Poor; Inside face milled 1mm and rough from broke axle; used with spacer
BBS 0228152 wheel center, RSR, magnesium 1 SOLD Good, but could use refinish

Race Parts
Jack stands, single level (capital city motorsports) set SOLD Good

chrcook

Pic of the steering wheel request:

Pbacon

PM sent

chrcook

Got a request for a pic of the straight pipes. Here ya go...

haulinkraut

PM sent.

chrcook

Got a request for pics of the uprights and the wing. Note the wing has a scratch on the top which needs / can be buffed out. It's a Crawford wing and will be sold with black side plates (yellow and the picture) and without the gurney flap (show in the picture).

chrcook

All PM's & e-mails responded.

chrcook

Here's pics of the jack stands.
​​​​​​​

Peter Guagenti

Do you have pics of the decklid and the repaired damage? I'd be interested in the decklid, wing, and uprights.

chrcook

Here's some pics of the decklid. Shoot me a PM or email and we can work out a deal for all. I've got interested in the uprights, but no deal is yet done on those.

AudiOn19s

could you please post pictures of the rotors? Are they the current offering form Essex or the older wrightwood design?

Thanks,

bmwtye

Sent PM on the bbs wheel center for $50. Can you please get me a pic of it. I think it may work for a piece of garage art I'm making.

chrcook

Attached are pics of the rotors. The hats were purchased in 2013 from Wright Motorsports. Not sure if old or new design.

chrcook

Lots of pings on the LCAs. Below are pics.

chrcook

Updated and all PMs answered.