Demon Speed 996 Cup Muffler Special
10-09-2017, 01:49 PM
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Demon Speed 996 Cup Muffler Special
Demon Speed Mufflers for the 996 Cup
SPECIAL PRICING FOR A LIMITED TIME. Now through the end of October, receive a special discount with Demon Speed. Use Coupon Code MUFFLEROCT
Mufflers are in stock and ready to ship.
Demon Speed Motorsports developed the 996 Cup Muffler system to meet the needs of our customers looking to fulfill the requirements for the PCA Racing rules for GTC3.
This year a change in production has taken place. The Demon Speed Motorsports exhaust systems are being produced for us under a private label by Stainless Workswhich manufactures all of its products here is the US located in Northern Ohio. The combination of the mandrel bent tubes, waterject cut flanges, and small footprint muffler make this a great combination.
Our dyno tests have found that the DSM exhaust meets or exceeds the horsepower produced by the factory Cup system. Typical gains by adding the DSM exhaust is 10 horsepower.
Recently a customer of ours changed an early 996 cup car exhaust system to a combination of late 996 cup headers and the Demon Speed Motorsports exhaust.
They had made before and after dyno runs to see the difference and they were impressed. The increase in horsepower do to this change totaled over 20 Horsepower and 15-20 FT-LBS in torque.
The Demon Speed Motorsports mufflers are a great alternative to the factory system.
Whether you are looking to replace an aging or damaged system, or if you would like to store your very expensive factory system, the DSM mufflers are a great way to go.
Thanks
Ed
Mufflers are in stock and ready to ship.
Demon Speed Motorsports developed the 996 Cup Muffler system to meet the needs of our customers looking to fulfill the requirements for the PCA Racing rules for GTC3.
This year a change in production has taken place. The Demon Speed Motorsports exhaust systems are being produced for us under a private label by Stainless Workswhich manufactures all of its products here is the US located in Northern Ohio. The combination of the mandrel bent tubes, waterject cut flanges, and small footprint muffler make this a great combination.
Our dyno tests have found that the DSM exhaust meets or exceeds the horsepower produced by the factory Cup system. Typical gains by adding the DSM exhaust is 10 horsepower.
Recently a customer of ours changed an early 996 cup car exhaust system to a combination of late 996 cup headers and the Demon Speed Motorsports exhaust.
They had made before and after dyno runs to see the difference and they were impressed. The increase in horsepower do to this change totaled over 20 Horsepower and 15-20 FT-LBS in torque.
The Demon Speed Motorsports mufflers are a great alternative to the factory system.
Whether you are looking to replace an aging or damaged system, or if you would like to store your very expensive factory system, the DSM mufflers are a great way to go.
Thanks
Ed
__________________
https://demonspeed.com/
Engineered Race and Track Products for your Porsche
https://www.goodaero.com/
Race Designed Aerodynamics
https://racingtirewarmers.com/
Win more races with tire warmers
Great products for racers by racers
ed@demonspeed.com
Demon Speed Motorsports is a proud sponsor of PCA and the Club Racing Program
https://demonspeed.com/
Engineered Race and Track Products for your Porsche
https://www.goodaero.com/
Race Designed Aerodynamics
https://racingtirewarmers.com/
Win more races with tire warmers
Great products for racers by racers
ed@demonspeed.com
Demon Speed Motorsports is a proud sponsor of PCA and the Club Racing Program
11-03-2017, 09:15 AM
#4
Nordschleife Master
We used this on our 6 Cup last year and it was GREAT..... I highly recommend it. Fit perfect too... We went a step further and ceramic coated it. Really seemed to make more power.
11-15-2017, 10:58 PM
#7
Rennlist Member
Ditto...My Demon Speed Muffler system has been fantastic...Dyno results were impressive. We did a swap with the stock system and pulled some nice HP and torque numbers. My car has a 3.8, i believe Ed has copies of the dyno reports.
