cid042

Hi,

I need a "E" weight class 3.6 996 GT3 RS (Racecar) conrod. If anyone has one...

Kindly yours,

Cedric

Viperbob1

I have a used set. Not sure the weight group. Perfect condition. Just we timed out the motor.

cid042

Thanks Bob, PM & e-mail sent.

Viperbob1

Sorry but I'm afraid I am on the way to the IMSA race this week and won't be back in the shop till Tuesday next week. I hope thats not an issue....

cid042

Hi Bob,
No rush, don't worry ;-)

jimsrs200jim

Hi Cedric
I have 6 sets of conrods for 996GT3 Cup cars ,all in perfect condition I also have all the other parts of the engines , plus gearbox parts for the 996 GT3 Cup cars , I will only sell a set of 6 con rods but you can choose , I am in England 1- 1/2 hour from Dover and will take Euros
Jim

cid042

Hi Jim,
I am after a 996 RS conrod, not cup ones, sorry.

Kindly yours,

Cedric

claykos

I have a set of 6 but 1 or 2 are slightly damaged with about 25 hours since reconditioning. I'm not sure of weight class. I'll be in the shop today and check.

claykos

i just looked at mine. Not sure how to tell weight class. They all have a V and a number like 208 or 220 stamped in one side of the big end. Half of them have an "A" and half have a "D" more crudely (looks by free hand) engraved in the opposite side of the big end....

cid042

Hi Clay,

Many thanks. What I am going to do is to weight mine as soon as I get a hand on them and will let you know. If you have the possibility to weight them accurately, I think it will be easier.

I will weight them without bearings, nor bolts.

Would you have a pic ?

Thanks for your help.

jimk04

Hi Cedric
Are these any good ?
Regards
James
ps.....calipers are coming along nicely....new paint this week
!

..edit.....link would help!
http://www.ebay.co.uk/itm/253061891414

claykos

Sorry, I was out of town for a week. I can weigh mine but they have the bolts pressed in, not easy to remove. I will send a picture when I get a chance.

cid042

Hello,

Just to be more precise, here is what I am after (see pic for general idea. unfortunately, there is no part number on the rods, to be sure of what we are talking about.

In "E" weight class, the ones I have are in the 368-370 grams without anything (bolt, nut, bearing... only the bare two parts conrod)

@Jim : Thanks ;-) These are 3.6 996/997 cup engine rods, not RS one, they are not constructed to same way, and are heavier. Happy you brought these calipers to life so quickly ;-)






996 RS conrods

Many thanks for everyone's kind help ! I am getting close ! ;-)

Cedric

cid042

No chance for now... Would anyone have one somewhere ?

cid042

Bump