Looking for a 3.6 996 RS conrod
#17
Rennlist Member
Thread Starter
Hi Cory,
Thanks. The left one, I have never seen in a 996 or 997 engine, the right one seems to be from a 997 R or RSR. ;-)
It seems that I will have to find a set...
Kindly yours,
Cedric
Thanks. The left one, I have never seen in a 996 or 997 engine, the right one seems to be from a 997 R or RSR. ;-)
It seems that I will have to find a set...
Kindly yours,
Cedric
#18
Former Vendor
Join Date: Feb 2012
Location: South Florida
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
TI Pankl 996 GT3R rods
Hello
When we spoke last week I did not realize that you were weighing the rods without the bolts. I have about 20 sets of these rods, I am sure that I will have one for you.
Rodger@orbitracing.com
When we spoke last week I did not realize that you were weighing the rods without the bolts. I have about 20 sets of these rods, I am sure that I will have one for you.
Rodger@orbitracing.com
#20
Rennlist Member
Hi Cedric
Are these any good ?
Regards
James
ps.....calipers are coming along nicely....new paint this week
!
..edit.....link would help!
http://www.ebay.co.uk/itm/253061891414
Are these any good ?
Regards
James
ps.....calipers are coming along nicely....new paint this week
!
..edit.....link would help!
http://www.ebay.co.uk/itm/253061891414
#22
Rennlist Member
Thread Starter
Hi Rickard,
I do not know which ones are the short ones, but I have some 997 cup 3.8 30 or 50 hours (I have to check), and some 997 3.8 RSR ones. Also have pistons and liners.
Cedric
I do not know which ones are the short ones, but I have some 997 cup 3.8 30 or 50 hours (I have to check), and some 997 3.8 RSR ones. Also have pistons and liners.
Cedric
#23
Rennlist Member
#24
The 127.8 short rods are early 996 cup and gt3r. In around 2003 they went to 130mm for the 996 and endurance 3 ring piston gt3rs and rsr. 3.8 rsr are long, 136 i believe. There are also some even longer 137.xx which are 3.6 rsr sprint engine rods for 2 ring pistons.