8202632

Hey all, been trying to find the holy grail of aftermarket front rotors. Doesn't exist for us. The closest I found was some 380mm x 38mm rotors at ECS tuning, but they are for audi and therefore do not have the correct bolt pattern or hub size.

I emailed ECS to see if they were planning to make an aftermarket part and they responded:

Hello,

Unfortunately at this time we do not have any info on a kit for your car. But if you get enough people interested in it and get them to start emailing our customerservice@ecstuning.com, That would def help get our R&D team to see what people are wanting us to develop.


Please let me know if there is anything else I can help you with. Thanks for choosing ECS!


Please email them and express your interest. We may all be able to save a lot of $$$ if they could produce something for us. Thanks!

wrinkledpants

What's wrong with the OEM rotors? Aren't people getting 70-100K miles out of those?

8202632

From a performance perspective nothing at all. From a price point everything!!!!

I've had my rotors replaced at 40k and will probably have to at 80k as well

hahnmgh63

I e-mailed ECS just to see their answer, I might be interested someday but I have a spare set of OEM's that I got a few years ago new for $995 (front or course, rear's are cheap). There was a post here recently of a place that was selling OEM rotors for a few hundred less than the dealers, that is the route that I would go now if I needed a set. There are many OEM parts you can get that aren't in the OEM box but these were the first that I had seen for the CTTS rotors, but they did have the SHW manufacturers stamp.

8202632

Thank u!!

John Veninger

I put theses on last week.
http://www.partsgeek.com/ss/?i=1&ssq...8676&x=16&y=15