911 Alignment for track
#1
Track Day
Thread Starter
Join Date: May 2004
Location: Easton PA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
911 Alignment for track
Finally getting around to installing 22/22 adj Welt swaybars on '74 911/3.2L track car. Already installed: 22/28 hollow torsion bars, adjustable spring plates, Bilstein Sports (corner-balanced and lowered) which I have been running for last 4 years. I need more negative camber, having corded outside edges of Kumho V700, while insides are like new. Last alignment was around 1.1 deg negative camber. Has anyone got 2 to 2.5deg without slotting? Anyone tried filing holes or cutting a flat in the large upper mount washer?
Saw an article in Up-Fixin on that and curious of BTDT.
p.s. also considering camber plates if necessary, recommendations for bolt-in welcome and any BTDT experiences.
Steve Jagernauth
'74 911/3.2 track
'74 911/3.0 street
Saw an article in Up-Fixin on that and curious of BTDT.
p.s. also considering camber plates if necessary, recommendations for bolt-in welcome and any BTDT experiences.
Steve Jagernauth
'74 911/3.2 track
'74 911/3.0 street