Smitty-B

Category: Engine - Exhaust
Price (no $ sign please): $2500
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 964
Location (Region): West
Item Condition: Used

Custom Exhaust for 964 Street/Track Car. S-Car-Go Headers with Magnaflow custom center exit exhaust behind Magnaflow Stainless Steel Catalytic Converters. Also included are a straight pipes on V-Bands for a quick swap for track days. Less than 500 miles on custom exhaust. Great sound and a nice performance upgrade!
$2,500 shipped to the lower 48.

eddieb4

Do you have video with sound? Does setup require a different center bumper?

Comanche_699

Some of the very best custom headers in the business! Somebody's gonna be a lucky dawg.

Porschekalle

what's the HP gain over stock .. do u need a tune for it ??

Smitty-B

Unfortunately I don't have any video of the sound - but it does sound good and the straight pipes sound really good if you can get it to the track! No modifications to the bumper are required.

I really don't know what the HP gain is but I'm sure you can coax more out of it with a tune/chip. I was running a LWF with SuperCup cams and appreciated the sound/performance.

bogey1

They make the BEST 964 headers. The set I had were museum quality. Somebody is going to get a great deal. The rest of the package is icing on the cake.

911pcars

Hello Brad,

interested... can you tell me the id of the primaries in inches or mm,
also the distance center to center of the V clamps on the muffler or
straight pipes, and lastly the distance of end of V clamp on headers
to the end of muffler, size and length of tail pipes. Sorry to be a
pain ... 964/993 engine in a 73 911 body.

Thanks,
Harry

Smitty-B

Hi Harry,

Id's are 2.5" on the Primaries and Tailpipes. Width is 29.5" and length from vband to back side of muffler (bumper side) is 15". Tail pipes are 7.5" long.

Hope that helps - ping me with addt'l q's

911pcars

Hi Brad,

What is the id and od of the pipes at the head..? Also the
measurement at the widest end of the cats..? Who made
the exhaust and straight pipes..? call me if you have a moment..

Thanks,
Harry
626 379-72 five two

Smitty-B

ID and OD are the same at 45mm. Pretty cool that the port collar flares out ever so slightly from where it is welded to the header pipe. Width to the outside of the widest part of the cat is approx 35"