nathan1

Category: Wheels & Tires
Price (no $ sign please): $2700
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 964, 993
Location (Region): NorthWest
Item Condition: Used

I have the following wheel/tire combo for sale:

Rotiform ROC Forged- Satin Gold Centers, Polished Lips, Black Barrels

Front: 18x8.5 5x130 ET 51

Rear: 18x10 5x130 ET 45

Wheels are AS-NEW have less than 200 miles on them, were on one of my 964 show cars (not the car pictured, I just installed them so people could see the fitment)

Tires: Advan Neova ADO8

Front: 225/40/18
Rear: 255/35/18
Tires were purchased March of 2012 from Tire Rack and have maybe 500 miles on them as they used to be on a different set of wheels. They are as new.

New this setup was $5,432, see receipts. I will sell it for half price or $2,700 + shipping in the CONUS.

I had them installed on a 964 C2 Coupe that was RS height minus 10mm. Fairly aggressive camber (-2) and rolled rear fenders and they fit PERFECT. The 964 you see in the photos is my driver, its ~RS height + 10mm, street alignement and non-rolled fenders. They fit fine, but would look better a little lower....

These would also fit a 993WB but rear tire fitment would need to be changed to 285 and 5mm spacers would make it perfect.

J_MENDIETA

Can you post pictures of these on your show car ? I'd like to see the fitment with a lowered 964

nathan1

The car pictured is lowered 35mm from stock US ride height which is ~ RS + 10mm. My other car I had them on was another 15mm lower than this. I dug around and for whatever reason I don't seem to have a photo with them on my other car. I change wheels often, but usually I do photo when they are on.

dw.metro

Hi, what is the height of of your 964 from the ground to the top of the wheel opening? Thanks

nathan1

The correct way to measure ride height on a 964 is from the road surface to outer mounting hex bolt member in the front and the road contact to outer control arm mount body side. US Spec 964 ride height measured this way is 175mm front and 268 rear. The car in the photos is 135mm front and 245 rear, which is RS + 10mm.

Measuring via the fender lips on that car gives just over 25" front and just under 25" rear. The other car I had them on was 15mm lower than this car both front and rear but had more aggressive camber.

Hope that helps!

dw.metro

pm sent

nathan1

I didn't receive a PM and it looks like for some reason I can't send you one.

me80

Still available?