Mark this thread as Unsold
F/S Europipe Stage 2 EP2 997.1 Turbo
#1
F/S Europipe Stage 2 EP2 997.1 Turbo
Category: Engine - Exhaust
Price (no $ sign please): $2500
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 997
Location (Region): West
Item Condition: Used
I would prefer local pickup as I don't have the original Box. I can ship but, I would need a day or two to fabricate a double ply box.
System is in good shape and runs perfectly fine. I have installation instructions. All parts included are in photos.
-Small scuffs from heat shielding.
-Driver side cat had a turbo fail in it. Stef says the damage could be cut out with a knife. I choose not to do this.
I have attached many photos and have also created some You tube videos prior to taking the system off the car.
This video is a "cold start."
This video is once the car has warmed up.
Paid, $5635.00 and will sell for $2500.00. Buyer pays PayPal fees and shipping.
Feel free to post or PM with any question.
Last edited by elite1; 01-03-2016 at 12:06 PM.
#2
Rocky Mountain High
Rennlist Member
Rennlist Member
I may be interested in this, depending on the amount of care that the system needs. I am in Colorado, so perhaps a local pickup could be arranged. Please send me a PM. I was considering the quiet version, and my other concern is that this may be too loud for me.
#4
Burning Brakes
Hi
Whats the story with the damage to the Cat on one side and can something like that be repaired or need to be replaced?
Also the deformations on the exterior of the Cat they appear on Both Cats is that part accelerate airflow or from damage?
Ian
Whats the story with the damage to the Cat on one side and can something like that be repaired or need to be replaced?
Also the deformations on the exterior of the Cat they appear on Both Cats is that part accelerate airflow or from damage?
Ian
#5
Hi Ian,
Basically, my turbo failed on the hot side and this spun against the cat.
Europipe said that I could use a sharp knife to cut out this area. The lowest point is approximately 4mm in depth so, its not much.
Let me know if you have any other questions,
Ryan
Basically, my turbo failed on the hot side and this spun against the cat.
Europipe said that I could use a sharp knife to cut out this area. The lowest point is approximately 4mm in depth so, its not much.
Let me know if you have any other questions,
Ryan
#7
Sold!
Thanks for everyone's interest and especially, thank you to a 6speed member for the purchase.
If anyone has any other questions regarding ownership of this system, feel free to contact me.
Thanks for everyone's interest and especially, thank you to a 6speed member for the purchase.
If anyone has any other questions regarding ownership of this system, feel free to contact me.