Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (https://rennlist.com/forums/)
-   Parts Marketplace - Old (https://rennlist.com/forums/parts-marketplace-old-217/)
-   -   Stop Tech six piston big brake kit (https://rennlist.com/forums/parts-marketplace-old/1110105-stop-tech-six-piston-big-brake-kit.html)

Mr Michael B 11-06-2018 08:54 PM

Stop Tech six piston big brake kit $990
 
Blowing these out to 1st interested party. SOLD
Cayman Interseries / Stop Tech race front brake kit. Ready to go. Bolt these on & stop faster. Kit includes two giant six piston calipers (Stop Tech ST60), two good full floating slotted rotors (355x32) with Stop Tech hats (AreoRotors/AreoHats), a set of used pads (with lots of material left), and the Stop Tech adapters. Fitment was from 2006-2012 Cayman. Used for two seasons then carefully packed away in the original boxes. $990 shipped (large boxes) from my 61606 zip to the lower 48. No paypal fees from me.
https://cimg5.ibsrv.net/gimg/rennlis...629ff6f8f0.jpg

gt2-josh 11-06-2018 10:51 PM

Awesome setup! GLWS! JBO

Mr Michael B 02-09-2019 06:51 PM

Dropped price to move them out. PM me with interest.

Kris991 02-11-2019 09:33 AM

Damn what a deal. Making me want to build a cayman race car so bad.. Just can't afford 2 race cars :(

Mr Michael B 02-11-2019 07:23 PM

Amen. They are rock bottom for high quality parts. Interest is there, just no trigger pulled yet.

nwGTS 02-12-2019 02:32 AM

Can you provide the part number of the ST60 calipers? Likely will start with 372.6xx.xxxx

Mr Michael B 02-12-2019 06:23 AM


Originally Posted by nwGTS (Post 15632974)
Can you provide the part number of the ST60 calipers? Likely will start with 372.6xx.xxxx

Sure, I will pull one out of the box today.

Mr Michael B 02-12-2019 02:12 PM


Originally Posted by nwGTS (Post 15632974)
Can you provide the part number of the ST60 calipers? Likely will start with 372.6xx.xxxx

The only numbers found on the caliper are: 3262L H


FactoryMatt 02-12-2019 07:06 PM

will they fit under most 18s?

Mr Michael B 02-12-2019 08:18 PM


Originally Posted by FactoryMatt (Post 15634657)
will they fit under most 18s?

Great question. I have had these under stock '10 Cayman 18's and BBS Motorsports 18's with no clearance issue.

tmachun 02-12-2019 09:18 PM

I have st 60 w/ 380mm rotors. Did not fit under 18 OZ alleggrita. Did fit under 18 ccw and forgeline.

Mr Michael B 02-12-2019 09:58 PM


Originally Posted by tmachun (Post 15634967)
I have st 60 w/ 380mm rotors. Did not fit under 18 OZ alleggrita. Did fit under 18 ccw and forgeline.

Yep, that larger rotor of your set up (380 Vs 355) may have had something to do with that. The 380mm rotor is GT3 sized.

Difool 02-13-2019 07:09 AM

PM sent


All times are GMT -3. The time now is 01:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands