Mark this thread as Unsold
FS: Alcantara crested 997 seats (also wired for 996 and earlier)
#1
Rennlist Member
Thread Starter
FS: Alcantara crested 997 seats (also wired for 996 and earlier)
Deposit taken 6/19/18... will update when official
Still for sale! Buyer backed out, new pictures of imperfections I've been texting to prospective buyers I believe in full transparency with no surprises hence the amount of pictures and information.
These are 997 turbo alcantara full power seats with Porsche crests in the headrest that can either be placed back in a 997 or are plug and play for ANY Porsche with power to the seats (964-993-986-996 ect). There are literally two wires to plug in and you're done with no modification to your oem harness.
I really really love how these seats update the interior. I searched for these for a good while and took the time to solder connections to bypass the memory in the drivers seat. The only function the driver seat lacks is lumbar due to the intricate memory module wiring, however the passenger seat retains FULL function.
$1000 obo by PM
-Located in San Antonio Texas
-Willing to ship at your cost (I have seat boxes already from my replacement seats)
-I can also deliver within reason and can help with install if you're totally lost.
Please note the driver side fore/aft button is broken and will need to be glued or replaced. If you're putting these back in a 997 you need to source a new control board from eBay ($100) and is an easy swap. Also the retaining clip for the front drivers seat cloth is missing and is noted in the photos and compared to the passenger side for reference. There is also some slight depression on the back drivers seat that is not noticeable when installed. Overall I'd rate these as 7-8/10 with a little love an easy 8.5
Thanks
Shawn
Still for sale! Buyer backed out, new pictures of imperfections I've been texting to prospective buyers I believe in full transparency with no surprises hence the amount of pictures and information.
These are 997 turbo alcantara full power seats with Porsche crests in the headrest that can either be placed back in a 997 or are plug and play for ANY Porsche with power to the seats (964-993-986-996 ect). There are literally two wires to plug in and you're done with no modification to your oem harness.
I really really love how these seats update the interior. I searched for these for a good while and took the time to solder connections to bypass the memory in the drivers seat. The only function the driver seat lacks is lumbar due to the intricate memory module wiring, however the passenger seat retains FULL function.
$1000 obo by PM
-Located in San Antonio Texas
-Willing to ship at your cost (I have seat boxes already from my replacement seats)
-I can also deliver within reason and can help with install if you're totally lost.
Please note the driver side fore/aft button is broken and will need to be glued or replaced. If you're putting these back in a 997 you need to source a new control board from eBay ($100) and is an easy swap. Also the retaining clip for the front drivers seat cloth is missing and is noted in the photos and compared to the passenger side for reference. There is also some slight depression on the back drivers seat that is not noticeable when installed. Overall I'd rate these as 7-8/10 with a little love an easy 8.5
Thanks
Shawn
Last edited by Sveach756; 06-20-2018 at 05:26 AM.
#5
Rennlist Member
Thread Starter
Buyer fell through and new detailed pictures added.
To go back into a 997 the driver side control switch where the buttons plug into needs to be replaced. I'd really recommend these stay in the 996/986 platform or older but if the price is right for you it might be worth the hassle.
Shawn
To go back into a 997 the driver side control switch where the buttons plug into needs to be replaced. I'd really recommend these stay in the 996/986 platform or older but if the price is right for you it might be worth the hassle.
Shawn
#7
Rennlist Member
Thread Starter
These seats are setup to work in anything with a 12v power source so in theory yes they'll work you just won't have OEM memory available and would have to have a power source.
Shawn
Also shipping via greyhound looks to be approx 150$ anywhere as greyhound ships by volume not weight.
Shawn
Also shipping via greyhound looks to be approx 150$ anywhere as greyhound ships by volume not weight.