Mark this thread as Unsold
18" OZ Racing Alleggerita HLT 8.5" 12"
#1
Rennlist Member
Thread Starter
18" OZ Racing Alleggerita HLT 8.5" 12"
Category: Accessories
Price (no $ sign please): $1000
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 996, 997
Location (Region): Midwestern
Item Condition: Used
18"x8.5" ET53
18"x12" ET68
Last edited by Slakker; 07-15-2017 at 09:11 AM.
#3
Rennlist Member
Thread Starter
They should rears should be pretty close to stock distance from the fender on a 997TT if I'm calculating right:
Stock is 10" with 40mm offset. You have 5" (127mm) from centerline to inside edge and then a 40mm offset for 87mm total from hub to inside edge of wheel.
These are 12" with a 68mm offset. So centerline to edge is 6" (152mm) minus the 68mm offset gives you 84mmfrom hub to inside edge of wheel.
The fronts will stick out 5mm more than stock and should fill in the fenders a little better.
Stock is 10" with 40mm offset. You have 5" (127mm) from centerline to inside edge and then a 40mm offset for 87mm total from hub to inside edge of wheel.
These are 12" with a 68mm offset. So centerline to edge is 6" (152mm) minus the 68mm offset gives you 84mmfrom hub to inside edge of wheel.
The fronts will stick out 5mm more than stock and should fill in the fenders a little better.
#5
Rennlist Member
Thread Starter
I had a pair of CCW's that were the exact same sizes that I had on my other '99 C2. I think I used a 7mm spacer on the front and none on the rear. I was going to do the same with my track car (hence the sets I purchased) but it's running quick enough times and I have it so well balanced right now that I need to just leave it alone.
#6
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
I had a pair of CCW's that were the exact same sizes that I had on my other '99 C2. I think I used a 7mm spacer on the front and none on the rear. I was going to do the same with my track car (hence the sets I purchased) but it's running quick enough times and I have it so well balanced right now that I need to just leave it alone.
#7
Rennlist Member
Thread Starter
Bump
Trending Topics
#9
Rennlist Member
Thread Starter
Bump
#13
Rennlist Member
Thread Starter
I certainly don't mind splitting and shipping if you two come to an agreement.
#15
Rennlist Member
Thread Starter
If Daredevil will go $500 plus shipping on the rears I will do it.