CUSTOM COLD AIR INTAKE FOR PORSCHE 928 1987-1995
 

Custom Cold Air Intake System,link below.
http://motobikeronline.com/partslarg...takesystem.jpg
Fits Porsche 928 1987-1995
Similar to the one in signature picture but with 3 1/2 inch elbows.
Looking to sell local pickup only!
Anyone in Ontario,Canada,in NY that may be interested,I'm about 15 miles outside of Niagara Falls NY.
The whole air intake system is lower than the intake manifold which the
top of Y pipe is approx. 5.7 inches tall and has very good hood and firewall clearance as the Y pipe is angled forward.
The lower part of the Y-pipe was machined to accept the stock MAF rubber grommet so it pushes onto the MAF.
System comes with brand new filters that I just ordered for it and also has brand new MAF grommet.
Filters go inside the long tubes where they are shown ontop in picture.
If you live in an area that requires a smog inspection, such an intake will fail the visual inspection portion of the test.
The system does have a connection for the stock airpump as a fitting is welded into the passenger side elbow
underneith where the stock connection is for the pump.
Sold as offroad use or check emmisions laws etc in your state before purchase.
Looking to sell local pickup only!

bump