Rear Spoiler
Anyone got a pic of their rear spoiler in the "down" position?
on my 2017 Panamera 4 the leading two edges of the spoiler don't seem to sit flush. I've attached a pic of this and i will admit it is a bit of a close up so looks more exaggerated than say when you are stood 1-2m away from the car but wondered if anyone with similar car could share a snap of theirs. OPC said it may need re-calibrating so are going to book it in. the lower edge / line above the rear lights and the "PORSCHE" logo lines up perfectly. its just the two "tips" if you call it that that stick up a bit. same on both sides. if you "push" down on that section there is obviously "give" there as the whole spoiler mechanism is i guess designed to be flexible on its mounts. it definitely was not like this on delivery so seems like with "use" its loosened up a bit. https://cimg2.ibsrv.net/gimg/rennlis...4be10ed20.jpeg |
https://cimg2.ibsrv.net/gimg/rennlis...54d096e26.jpeg Here’s mine (4e-hybrid). Not as pronounced as yours but sticks up a little. |
https://cimg0.ibsrv.net/gimg/rennlis...8cee078d79.jpg
Perfectly flush
Originally Posted by thorfun
(Post 14658468)
https://cimg2.ibsrv.net/gimg/rennlis...54d096e26.jpeg Here’s mine (4e-hybrid). Not as pronounced as yours but sticks up a little. |
Originally Posted by jtorrebl
(Post 14660085)
|
update on this....car went in to have the fuel filler body replaced to remedy the bad fit and stickiness of that. whilst it was in also got them to look at the spoiler. Sorted. somehow, possibly during a s/w update? the spoiler motor calibration had gone awry, technician hooked car up to some laptop went to some program that re-calibrates the spoiler motor positions for the various movements and it now sits how it should. if your spoiler is sitting "high" like the pic i attached next time you have time get it booked into your local OPC and they can sort this pretty easily.
|
Thanks, NorthernMonkey. Another thing to look out for. Sounds like your OPC have been very helpful. :thumbup: |
Originally Posted by NorthernMonkey
(Post 14711446)
update on this....car went in to have the fuel filler body replaced to remedy the bad fit and stickiness of that. whilst it was in also got them to look at the spoiler. Sorted. somehow, possibly during a s/w update? the spoiler motor calibration had gone awry, technician hooked car up to some laptop went to some program that re-calibrates the spoiler motor positions for the various movements and it now sits how it should. if your spoiler is sitting "high" like the pic i attached next time you have time get it booked into your local OPC and they can sort this pretty easily.
|
All times are GMT -3. The time now is 08:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands