TPC,

Interested in your 996 C4/TT rss monoball top hats, If still available.

Regards,

Mikesperformance

TPC-

Hello, a question for you. I saw your post about control arms and thought you might be a source to help me. I have a crack in my 2016 GT4 front lower control arm. It's the longer arm and not the monoball. I cannot find any other option than ordering stock control arm as a replacement. These are several 981 arms advertised out there but state -not for GT4. Do you know of any true plug and play front control arms that will work on the GT4.

Thanks in advance.

David
8502769190

Hi Tom,
For a stock 2007 Carrera S, is it possible to specify spring rates, ie. F 800 R 900 for the DSC DDA Tractive coilovers?
Thanks
Gary

Tom,

Will these parts work with the Tarett upper mount for a 997.1 GT3?

Pair of billet aluminum spring hats for 60mm ID springs
Pair of stainless steel upper bushing nuts threaded for PASM-type shocks.
Pair of stainless steel lower bushings. Shallow depth to allow for increased thread grip of the upper bushing nut.

Jeff

Hi Tom,

I read about dsc in internet, My question is:

1. How does stage oem 1 and 2 refers in stifnes to dsc 1,2,3.
2. Does it work if I change only modul, without springs? What efects?
3 What do you suggest? Change dsc and springs? you ve mentioned 80/130nm. How it effects on the street What is teh price of that set to install to my 7gt3 mki?

Regards
Martin

Hi Alan,

DSC is the same between GT3 and RS.

Best Regards,
Tom

Are you active on here I have a question

Tom,

Am I correct in assuming that the DSC for a 10 GT3 RS would be different than one for a 10 GT3? The reason I ask is that I am going to RA next week with a friend and he has the RS. If it is the same my thought was to maybe get one and try it in his car and then put in mine for the upcoming NNJR event at VIR.

Thanks, Alan