Description:

Selling a complete caliper set from a 997 Gen 1 PCCB option for 350mm rotors F & R. The donor car had around 80k miles at time of part out. I had all four rebuilt by PMB. Since rebuild, I've only put about <1000 street miles on them with iron rotors. Going back to stock setup for resale. I had some issues with squeal coming from the rears, but suspect I had some unrelated issues to the calipers themselves. The pads were NOS GT3/GT2 pads, and still have good life - but dust like crazy. I also have the backing plate and hard lines necessary to go from 330mm to 350mm. 

996-351-431-30    Caliper, Front Left (28mm/32mm/38mm)
996-351-432-30    Caliper, Front Right (28mm/32mm/38mm)
996-351-948-00    GT3/GT2 Front Pads
997-351-805-05    Splash Shield, Front Left
997-351-806-05    Splash Shield, Front Right
996-355-581-9B    Hard Brake Line, Front Left
996-355-584-9B    Hard Brake Line, Front Right

996-352-423-32    Caliper, Rear Left (28mm/30mm)
996-352-424-32    Caliper, Rear Right (28mm/30mm)
996-352-948-90    GT3/GT2 Rear Pads
997-355-503-10    Line Support Bracket, Rear Left
997-355-504-10    Line Support Bracket, Rear Right
997-352-801-02    Splash Shield, Rear Left
997-352-802-02    Splash Shield, Rear Right
996-355-585-11    Hard Bake Line, Rear Left
996-355-586-11    Hard Brake Line, Rear Right