997 + 987 + 986 Race / Stock partout - BBK / Brembo / MCS / KW / OEM
For Sale2009 Porsche 911
08-12-2024, 08:12 PM | Replies: 22 | Views: 2091
Description:
A bunch of go-fast and stock parts.
Shipping extra at cost with UPS.
Prices obo
Picture | Title | Part Category | Price | Part Description |
---|---|---|---|---|
987 KW Clubsport V3 | Accessories | $3400 | https://www.kwsuspensions.com/products/kw-suspensions-kw-v3-clubsport-coilover-kit-35271816.html 987 KW Clubsport V3 Recently rebuilt with receipts |
|
Brembo 355mm GT BBK kit for 997/987 with floating rotors | Accessories | $3500 | https://flat6motorsports.com/products/brembo-gt-355x32-2-piece-slotted-6-piston-big-front-brake-kit-987-cayman-boxster Comes with full thickness Ferodo FM1000 brake pads. Rotors with good thickness Willing to work out a deal that includes the GT3 rear calipers |
|
997 "big red" front calipers (pair) | Accessories | $450 | Recently refinished but never assembled and without rebuild hardware. Part numbers: 996.351.425 / 996.351.426 |
|
997 GT3 / Turbo rear calipers | Accessories | $750 | Recently refinished with new hardware & includes new pads Part numbers: 99735242511 / 99735242611 |
|
Pagid RS14 pads front and rear | Accessories | $385 | Very lightly used, full thickness - retail for ~$700 (for Porsches with big reds - eg. 996TT, C4S, 997 C2S, GTS) |
|
996 GT3 Monoball LCA ends | Accessories | $150 | New. Supposedly NLA 996.341.541 |
|
Fabspeed 997.2 C2S 3.8 Headers | Accessories | $675 | As shown | |
997.2 coilpacks - new | Accessories | $350 | Description:(6) Brand new in box, latest part revision, directly from Porsche, OEM coil packs for a 997.2 that I didn't get around to replacing.From the dealer:
Cheapest I could find online was $450 shipped after tax. |
Last edited by hexagone; 08-27-2024 at 08:18 PM.
Reply
#3
Rennlist Member
Thread Starter
Trending Topics
#9
Rennlist Member
Thread Starter
#13
Question: Which of these parts are compatible with 986? Thanks!
#14
Rennlist Member
Thread Starter
I cannot make any guarantees on fitment, however from the internet....
For suspension:
For brakes:
Should bolt on assuming same caliper spacing - but you'll have to do your research.
For suspension:
The suspension components on the top end are the same and directly bolt on; however, it is the wheel carrier end that does not bolt up, at all. Reason, the bottom of the strut for 987s is about 1/8" wider, hence, the bottom of the strut will not slip in between the 986 wheel carrier. So you'll need new wheel carriers/bearings
Should bolt on assuming same caliper spacing - but you'll have to do your research.
The following users liked this post:
bcrdukes (08-26-2024)
#15
Thanks, hexagone. Hope you can find a buyer for these goodies!