StudioRSR 718 GT4 roll cage/bar & Schroth Porsche GT3 Enduro 2x2 Safety Harness &more
For SaleInterior/Upholstery
-
Price
$2,950
- Location New York, NY, 10006, USA
- Condition Used
Description:
Took these off my car as it is now sold
StudioRSR Porsche 718 GT4 roll cage / roll bar
Vehicle: 718
Year: 718
Rear Legs: Straight
Material: Chromoly
Color: Black
https://studiorsr.com/products/porsc...39609107284137
$2,495 at StudioRSR and took about 5 months from ordering to delivery
These do not require trimming but if you don't want the car to be "naked" as I ran it without panels, I also got backup OEM panels to cut around but never needed to. These part numbers are:
981 555 190 01 1E0
981 555 451 80 1E0
(total to about $310 for both sides)
Also included a picture of it installed in my car before being taken off
Comes with the same bolts and brackets they sent, but the installer said it was 2 bolts short but he made due with what they sent
Local pickup in NYC preferred but will ship at buyer's expense
Below are now sold!
Also have Schroth Porsche GT3 Enduro 2x2 Safety Harness - Black for both sides (retail at $719 each, so $1,438 for both sides)
Trending Topics
So I don't get it, do the OEM plastic need to be cut/trimmed for this to fit, or not? Excuse my ignorance, I assume you must have to cut them somewhere for pretty much any roll bar, but I'm confused by the wording here since you said they "do not require trimming"
so the carpet doesn’t need to be trimmed but yes the panels do require cutting to fit around the bar and that is why I got the backups to cut so that the originals would be untouched, but ended up just running the bar without the panels at all, if that makes sense.
