Description:

Edit 10-27-22: more pics posted
Edit 11-4-22: price dropped $1k

Hi there, 

I am selling my beloved SPB. Below is a description of the car. She is truly great.
The car is located in Northern California at BlackSheep shop in Fairfield.
Please PM me if you have any question or chat by phone.

Overview:

This is an 1999 SPB that was bought as a new build from ValiMotorsport in Oct 2019 for $43,000. I have the bill of sale.  The car has always been kept indoor and prepped, serviced and upgraded by two of the best shops in California: BRRacing and BlackSheepRacing.  Only professional mechanics have worked on the car.

The car has NEVER seen any contact with anything, not even a little dent.  I used it for SCCA racing school, different Des and a few PCA races.  Yes, I have been lucky…

The car has the potential to win PCA club racing and was set up and tested properly with the help of coaches Greg Liefooghe (IMSA Pro) and later with my friend Aaron Jeansonne (Pro MX-5  cup driver and winner of the 2020 Mazda MX-5 shootout fellowship).  Aaron had never driven any SPB in his life and at the last PCA race I did at Laguna Secca, I had him test the car in DE (red group) to help fine tune the setup and put a reference lap for data overlay for coaching purposes.  Aaaron had a couple of clean laps in DE and was able to get the best time of the weekend among ALL SPB racers, quali and races included.  (video and data to prove it).  The car could be even a bit faster by losing some weight as she was 75 lbs above (I am 175lbs).  I just didn’t want to take over this project. So yes, the car can win.

The car has been upgraded with no cost sparing in mind with a focus on driver development, performance and safety.  The car is equipped with (2) AiM Smarty Cams with brake and throttle sensor and the amazing Racetech seat 4129, not the 4119, an $3,800 upgrade for ultimate safety.

Reason for the sale:

I have an SMT as well and have raced both cars in SCCA and PCA. Ultimately, I really love both and the people in each series but have decided, at this point to focus only on the SMT with SCCA and NASA.  Therefore, she needs to go.

Included in the sale:

Car with upgrades



 Options for sale at 50% of my cost if you buy the car:

Car cover ($250)

Extra set of silver Jongbloed wheel ($1,400)

Laguna Secca 90 db exhaust (see pics below) ($1400)

Extra transmission, never used, rebuilt by Tim Smith (tgsmith4845 on Rennlist) ($1400)

8 sticker (new, never mounted, March 2022) Toyo tires ($2,210)

Total: $6,660 that you can have for $3,330 if you buy the car



 Asking price:

$49,900

$53,230 with the above options (at 50% of my cost)



 Vali build sheet:

Boxster spec build sheet:

- Front third radiator( boxster S )

- Third radiator support brackets and hoses

- Custom stainless front bumper screen

- Front and rear tow hooks (Racetech straps) *

- Removal of all unneeded weight from the car

- Stainless rear bumper screen

- Front and rear GT3 lower arms (Adjustable)

- GT3 shims (for aligning the car)

- Tarett Engineering front sway bar and extended drop links (adjustable)

- Coil springs 450lbs (Front), 500lb (rear)

- MCS coilover suspension kit (adjustable)

- Tarett Engineering precision transmission linkage kit

- Light weight battery

- Electrical cutoff/kill switch, mounted in and out

- 1:75 Vali motorsports roll cage

- Fire suppression system (electric), activation switch mounted inside and out

- OMP steering wheel hub; OMP steering wheel *

- Steering wheel quick release

- Recaro seat *

- Lightweight harnesses (unsure of manufacturer) *

- Roll bar peddling *

- Getty fiberglass roof ( Light Weight)

- Lexan back window

- Boxster S cooling lines

- Stainless full exhaust system *

Engine Rebuild:

 - Valve job

- New seals and gaskets

- L&n engineering ims bearing kit 2

- Deep oil sump

- New ignition coils

- New spark plugs

- New boxster S oil cooler

- New air/oil separator

- Under-drive pulley kit

- New water pump

- New air filter

- New Aasco lightweight flywheel

- New Sachs clutch (Motorsports)

- Practice Toyo tires

- Tarett enigneering rear adjustable toe links

- Tarett engineering race wheel studs

- Race brake pads *

- New brake rotors *

- Porsche ABS system

- Brake air ducts

- Window net

- Roof net

- Rebuilt brake calipers

- Rebuilt axles

- Rebuilt transmission (new carbon synchros, steel pins)



 Options on the car include:

- Aim mxl2 data logger

- Sensors (brake ,oil pressure, oil temp, cooling temp, throttle position ,data hub ,cables)

- Electrical start button ,key delete

- Light weight car harness

Engine dyno 197 RWHP (Max is 200 by rules)

New white exterior, new white interior



 Upgrades: done by BRRacing for all and Blacksheep for the Racetech seat)

Racetech seat 4129 with back brace

Oil Deep Sump Kit 2 Quart Deep Sump

Motorola radio : AAM01QNH9JA1 N - CM300D

Push to talk button: PTT-HM

Front brake air guide left and right

Wide rear view mirror

Roll bar SFI padding: Allstar Performance ALL14112 1-1/4" to 1-3/4" SFI Mini

Reinforced pedal assembly and clutch stop: RSS Clutch stop and

                                                                               Rev3 Fully Adjustable Gas Pedal – Porsche

Sparco steering wheel flat bottom

Steering wheel quick connect: RS-097R

Numeric shifter with new cables and riser: NM100 - Competition Shifter, All 986, Numeric racing

                                                                              NM200 - Shift Cable Set, Cup Style

                                                                             SRSK - Shift riser, kit

Cool suit system: FA1213D - FAST cooling 13qt system

AiM SmartCam HD front and rear

Throttle sensor for AiM

AiM Brake Pressure Sensor, 2000 psi

MESA BPA - Brake pressure sensor adapter

Hardwired for Garmin Catalyst

Edit 10-27-22: more pics posted
Edit 11-4-22: price dropped $1k