Porsche Lift Pucks, Jack Pads for 911, Cayman, Boxster 1987-2019
For Sale
#376
I have received mine last week and they look great. Not saying I love to change tires, but for a number of reasons, I can't wait until the spring to get my snow tires off and summer tires on using the pucks. Great work Porsches4all.
Side note: I need to get some Esso jack stands to update my tools for working on my new CGTS4.0 and I'm wondering, given the 4 jack points (and pucks) when you jack the car at the jacking point, where do you put the flat jack stands? Any best practices or guidance you can point me to?
Side note: I need to get some Esso jack stands to update my tools for working on my new CGTS4.0 and I'm wondering, given the 4 jack points (and pucks) when you jack the car at the jacking point, where do you put the flat jack stands? Any best practices or guidance you can point me to?
#377
#378
Finally got to use these to lift my GT3 onto wheel dollies. These are definitely the way to go, as it's so easy to find where the jack should go and not damage anything.
They fit quite loose into the oval slots, but once turned 90 degrees they won't fall out. I only use the rear lift points since it gets the whole side of the car off the ground. Just remember to take them out before driving away!
They fit quite loose into the oval slots, but once turned 90 degrees they won't fall out. I only use the rear lift points since it gets the whole side of the car off the ground. Just remember to take them out before driving away!
The following users liked this post:
Porsches4all (01-23-2023)
#380
I think the pics and posts above speak to the quality of the pucks ...
Dan is awesome to deal with. It's refreshing to deal with someone that still takes pride in their product/service and delivers on what they promise in a timely manner.
Thanks you sir.
Dan is awesome to deal with. It's refreshing to deal with someone that still takes pride in their product/service and delivers on what they promise in a timely manner.
Thanks you sir.
The following users liked this post:
Porsches4all (02-11-2023)
#383
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Dec 2019
Posts: 233
Likes: 13
From: Los Gatos, CA
Please note the rubber portion is 3 inches in diameter, about 1 inch thick. Please ensure your jack saddle (landing portion) is larger than 3 inches. Small-area jack saddles are not a good match. Thanks!
#384
On a similar subject: Whenever I am going to remove a wheel from a car, I put my cased torque wrench in the driver seat.
The following users liked this post:
Porsches4all (03-06-2023)