Dundon GT4 Lightweight Race Exhaust
For SaleEngine - Exhaust
Description:
This is a one off GT4 lightweight 2.5" (PSE 2.25") race exhaust that Dundon built for me;
Inconel over axle pipes
Coast Fabrication thin wall stainless steel mufflers
Titanium 3.5" straight exhaust tip section
Performance Coatings satin titanium 2000C ceramic coating
Weighs 14.1 lbs with the eight clamps.
The PSE is 38.5 lbs, so the weight savings is 24.4 lbs.
This system screams like an RSR at high RPMs, but doesn't draw attention if driven at low load and low RPMs.
Used with Dundon race headers without catalysts.
The original perforated muffler inserts and packing have been replaced with titanium straight pipe inserts that raise the resonance frequency above the drone range.
Headers with catalysts would somewhat muffle the exhaust.
More details at;
https://rennlist.com/forums/gt4/9937...or-3800-a.html
https://rennlist.com/forums/gt4/9321...e-journal.html
$3,800 - Dundon lightweight race exhaust
$ 450 - Performance Coatings satin titanium 2000C ceramic coating
$1,288 - Materials used to arrive at the titanium straight pipe insert configuration: stainless steel straight and slip fit tubing, hole saw bits, custom titanium baffles, titanium perforated, straight and slip fit tubing, stainless steel and ceramic packing
Asking $2,950 (includes CONUS shipping)
Obligatory video of revving the engine while stationary;
Here's in car audio with the iPhone 8 inbuilt microphones and windows closed, tunnel reflections at 01:26, 05:14 and 10:20;
Also did you get coating done because it gets to hot?
I also like the look of it through the removed diffuser heat shields, which are no longer needed because the race exhaust isn't tucked up against it like the PSE is.