Go Back  Rennlist - Porsche Discussion Forums > Rennlist Classifieds > The *NEW* Marketplace
Reload this Page >

PORSCHE 911 FRONT SPOILER ADAPTER KIT - 997.1 WITH 991 OEM SPORTS SPOILER

Notices
The *NEW* Marketplace Over time, this will replace the old Marketplace area located below this section.

PORSCHE 911 FRONT SPOILER ADAPTER KIT - 997.1 WITH 991 OEM SPORTS SPOILER

Exterior Body Parts

 
01-19-2019, 07:41 PM | Replies: 0 | Views: 329
Addict
Rennlist Member
Join Date: Sep 2013
Posts: 796
EMC2 is offline  

  • Price
    $239
  • Location Alpharetta, GA, USA
  • Condition New
  • Compatibility
Make Model Year
Porsche 911 2005 - 2008
Description:

Please note there are 2 versions of this Kit for the 997.1 Porsche. Please refer to the compatibility guide shown in the photos attached to this listing.

This adapter kit allows you to install the newer generation OEM Porsche 991 Sports Spoiler (part # 991505525011E0) onto a 997.1 Porsche 911 (2005 - 2008 models, see fitment chart in listing for exact compatibility details).

This adapter kit provides a strong, secure and lasting solution to attach the 991 OEM Sport Spoiler to your 997.1,

The kit ensures a neat and professional installation and appearance, so that everything looks good even when inspecting the underside of the vehicle.

The unique clip adapter system locks onto the newer generation 991 Spoiler tabs, installation is quick, simple and 100% reversible.

The result is a completely OEM / factory look and fit of the 991 spoiler, as the adapters are fully hidden behind the spoiler. See pics in this listing.

The Kit can also be reused if the spoiler ever needs to be replaced due to damage or scraping.

Kit A includes:

  • 8 x Adapter Clips with 3M VHB pre-applied
  • 10 x Stainless Steel Hex Cap Bolts
  • 10 x Well Nuts
  • 1 x 1/8' Hex Key
  • 2 x Wing Retaining Clips
  • 2 x Wing End-Caps
  • 2 x Anti Flex Clips
  • 1 x Special Drill Bit with depth control guide tool (ensures hole's can be drilled safely into underside of bumper skin)
  • 1 x drill hole guide
  • 8ft Trim-Lok
Kit B includes:
  • 3 x Adapter Clips with built-in anti-flex support
  • 2 x Support Clips
  • 9 x Stainless Steel Hex Cap Bolts & washers
  • 9 x Well Nuts
  • 1 x 1/8' Hex Key
  • 4 x Wing Retaining Clips
  • 1 x Special Drill Bit with depth control guide tool (ensures hole's can be drilled safely into underside of bumper skin)
  • 1 x drill hole guide
  • 8ft Trim-Lok

Detailed installation guide included.

See thread below for more pics and reviews:
https://rennlist.com/forums/997-foru...97-1-done.html


(Not applicable to vehicles with Porsche GTS, GT3, GT2, Speedster, Turbo or Aftermarket front bumper)

KIT A Ground Clearance after spoiler installation with stock suspension (approx. figures for example only):
Non-PASM vehicles - front lip clearance = 115mm (4.53inches)
PASM equipped vehicles - front lip clearance = 105mm (4.125 inches)

KIT B Ground Clearance after spoiler installation with stock suspension (approx. figures for example only):
Non-PASM vehicles - front lip clearance = 125mm (4.92inches)
PASM equipped vehicles - front lip clearance = 115mm (4.53 inches)

Owner responsible for determining suitability of clearance prior to ordering as refunds can not be offered for matters relating to ground clearance. Lowered vehicles may be subject to excessive scraping if not careful with inclines, approach angles etc.


Thread Tools
Search this Thread

Contact Us - About Us - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.