BBiAutosport

Attachment 1344394
GSpeed Porsche Cayman GT4 Track Project with Fiske Wheels & BBi StreetCup Package



We would like to share this black Porsche Cayman GT4 Track Build by Gspeed in Texas. To turn her into a dedicated track monster, Gspeed installed our complete BBi Autosport StreetCup Track Package along with a very long list of upgrades from Cobb Tuning, Cargraphics, Fiske Wheels, Cobra and many more. Located in Cresson, TX, we are proud to have GSpeed as one of our premiere dealers in the country representing our complete line of performance and safety upgrades. Here are some detailed pictures of the build process that we would like to share below.

Vehicle Specifications

Interior:

• BBi Autosport GT4 Roll Bar
• BBi Seat Base & Slider Kit
• Cobra Evolution Pro Racing Seats

Engine/Transmission:

• Cargraphic Headers
• Cobb AP V3
  

Suspension Upgrades

Front

• BBi Bumper Steer Kit Front
• BBi Adjustable Thrust Arms Front Pair
• BBi Adjustable Thrust Arm Bushings Front Pair
• BBi Lower Control Arm Inner Bearing Flange
• Swift Springs #448
• Tarett Engineering Adjustable Sway Bar End Link Front

Rear

• BBi Rear Toe Adjustable Toe
• BBi Adjustable Thrust Arms Rear Pair
• BBi Adjustable Thrust Arm Bushings Rear Pair
• BBi Lower Control Arm Inner Bearing Flange
• Swift Springs #560
• Tarett Engineering Adjustable Sway Bar End Link Rear

Wheels/Tires

• Fikse Profil 5S Wheels Front: 19x9.0 et51 & Rear: 19x11.5 et51
• Bridgestone Potenza RE-71R Tires 255/35/19 & 305/30/19 Tures

Exterior

• BBi Autosport Extended Wing Uprights

BBi Autosport 981 GT4 StreetCup Roll Bar Satin Red


Key Features

• Chrome moly steel tubing utilized for excellent strength to weight ratio
• Modular construction to allow access to engine for servicing without removing entire roll bar
• Shoulder harness mounting crossbar positioned at appropriate height as per Schroth's instructions
• TIG welded and utilizes "X" braces on rear section for superior strength and rigidity
• Mounts to frame structure and rear strut tower to provide strongest mounting points and maximum protection
• Utilizes laser cut mounting plates & inner diameter tube clamps that are CNC turned and milled for a precise fit
• Designed to work with stock or any aftermarket seats on the market
• Minimal effect on seat travel to accommodate taller drivers
• Can be used with stock seat belts or 6 point harnesses for track use
• Designed to work with wrap-around style harnesses while optional eyelet bolt provisions are available for clip-in harnesses
• OEM fit & finish. The main hoop contours entire arch of the roof with an even curve
• Finished in satin black powder coat. Other colors available
• Bolt-in installation requires no drilling and minimal carpet trimming

BBi Seat Base & Slider Kit Porsche 996/997/991/987/981 Seat



The BBi Autosport race spec seat mounts are a direct bolt into the factory mount location for a hassle free, easy installation for your competition race seat. The BBi Autosport Seat mounts have a large range of adjustment options allowing fitment for all major FIA and SFI approved seat brands and offers an integrated 5 and 6 point sub belt mounting location.The wide range of adjustment covers almost all possible seating preferences to properly seat drivers of all sizes. CAD designed, CNC laser cut and formed from one piece of .125” (1/8”) carbon steel with no welds to maximize strength and stiffness. All mounts are powder coated with a wrinkle black base and satin black sides.

Features

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel (base & side mounts)
• Multi way adjustability
• High strength sliders, mounts to base with 4 bolts per slider
• Integrated 5 and 6 point sub belt mounting locations
• Stylish design with laser cut BBi logo and durable satin black Powdercoat finish
• No modifications to vehicle or any seat mount components are required for installation
• Uniquely designed for Porsche vehicles for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• Fits all major FIA/SFI approved seats up to 17”
• 14-3/4”¬(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
• 16”¬(375 mm) to 18-3/4”(445mm) width adjustments (optional wide side mounts)

BBi Autosport Porsche Cayman GT4 StreetCup Suspension Package


BBi Autosport Front Bump Steer Kit

• Helps eliminate bump steer by maintaining proper front end suspension Geometry
• Utilizes misalignment rod ends of the arm to provide maximum articulation
• Highly recommended for vehicles that have been lowered
• Each kit includes pair of 2 Links

BBi Autosport Rear Adjustable Toe

• Provides additional rear toe adjustment
• OEM link is non-adjustable and eccentric bolt provides limited adjustment range, causing excessive tire wear and handling issues.
• Helps maintain proper rear end suspension geometry
• Each kit includes pair of 2 Links

BBi Autosport Front & Rear Thrust Arm Kit

• Connects the Lower Control Arm to the subframe
• Provides precision caster adjustability
• Spacers included for setting stock or anti-squat and anti-dive configurations
• Each Kit Includes Pair of 2 Links
• Fits both front and rear axles

BBi Autosport Front Adjustable Thrust Arm Bushing Kit

• Provides two eccentric mounting points
• Used to adjust for increasing or decreasing wheelbase, and adjustable caster.
• A must-have for extended lower control arms (GT3 control arms or eccentric monoballs) to correct for unintended caster change
• Compatible with all stock Porsche 996 and 997 lower control arms (including Porsche Motorsport Cup arms)
• Sold as a set of 2 or a Complete set of 4

BBi Autosport Lower Control Inner Spherical Bearing (Mono-ball) End Kit:

• Upgrades 981 GT4 front and rear control arms to improve chassis response by eliminating rubber bushings
• Improved inner bearing flange design. Slimmer and lighter than factory OEM & Cup style
• High-strength sealed steel alloy spherical bearings, completely serviceable unlike the motorsports arm
• Also fits all 986, 987, 996, 997 with upgraded GT3/RS OE front or rear split control Arms
• Each kit includes a pair of 2 inner bearing flanges

BBi Autosport Porsche Cayman GT4 StreetCup Rear Wing Supports



The highly anticipated BBi GT4 wing supports are direct bolt-on parts that raise the factory wing up into the cleaner air by 80mm. CNC machined out of 6061-T6 billet aluminum in Southern California, the pieces are beautifully contoured to look like they came from the factory instead of being an afterthought.

Features

• Increase 80mm Over the OEM Wing Height
• Made of Precision CNC Machined 6061-T6 Billet Aluminum
• Durable Hard Anodized Flat Black Finish
• Easy to Install. No Drilling or Cutting Required
• Designed to Use with OEM Weather Seals & Hardware
• Compatible with Porsche 981 Cayman GT4 Model Only
• Made in the USA

About GSpeed



215 Performance Lane
Cresson, TX 76035
877-512-5180
Monday-Saturday, and select Sundays for large events
8AM - 5PM

Facebook www.facebook.com/gspeedofficial
Instagram www.instagram.com/_g.speed_/

International shipping is available and wholesale inquiries are welcomed. BBi Autosport products are also available worldwide through our growing dealer network in North America, Latin America, Europe, Middle East, Africa, Asia and Pacific. BBi Autosport is always actively working to expand our dealer network worldwide to grow the distribution of our products and better serve our growing client base. For all questions and inquiries, please email Jerry@BBiAutosport.com or Sales@BBiAutosport.com

- jerry@bbiautosport.com

kfmcmahon

delete--wrong thread

tstafford

Lovely.