Originally Posted by ExMB (Post 13397032)

Why? When you can approximate it for yourself with your present alignment. All you have to do it find a 3/4" thick x 2' long and x" wide piece of ? and tape it to your front wheel/tire combo. In this case it doesn't matter that the OEM wheel is 8.5" versus the Volk at 9" since a 245 tire is wider than either. The 3/4" thickness will account for the increased section width mounting the tire on a wider wheel and will cover the increase of the offset. Then all you have to do is look down the side/fender of your car and make your own judgement.

Shouldn't take any longer than the time to drink a cold one.:biggulp:

Originally Posted by Shockwave (Post 13397298)

ExMB... Just from the Math and the way the GA1R looks (19x9 +48) I can tell it will poke beyond the fender... I would have to run -3 camber or more just to prevent rubbing.

Originally Posted by hadokenny (Post 13396978)

No offense but these look no where near as good as the volk TEs and they are only 5 spokes.

Originally Posted by ExMB (Post 13397308)

In that case your post () doesn't make sense; it expresses fitment doubt.

Originally Posted by evil panda (Post 13397361)

if you don't mind a contrary opinion, i think those look totally off on a GT4. the wheels aren't bad looking, they just don't belong. i know they have other, non-aesthetic benefits, but that's my input on this thread.